Common Weakness Enumeration

CWE-276

Weakness Allowed

Incorrect Default Permissions

Abstraction: Base · Status: Draft

During installation, installed file permissions are set to allow anyone to modify those files.

Mapping guidance

This CWE entry is at the Base level of abstraction, which is a preferred level of abstraction for mapping to the root causes of vulnerabilities.

Carefully read both the name and description to ensure that this mapping is an appropriate fit. Do not try to 'force' a mapping to a lower-level Base/Variant simply to comply with this preferred level of abstraction.

Relationships and members
ChildOf: CWE-732 · View CWE-1000
ChildOf: CWE-732 · View CWE-1003
Modes of introduction
Architecture and Design
Implementation
Installation Operation
Detection methods

Automated Static Analysis - Binary or Bytecode

According to SOAR [REF-1479], the following detection techniques may be useful:

Cost effective for partial coverage:

Inter-application Flow Analysis

Effectiveness: SOAR Partial

Manual Static Analysis - Binary or Bytecode

According to SOAR [REF-1479], the following detection techniques may be useful:

Cost effective for partial coverage:

Binary / Bytecode disassembler - then use manual analysis for vulnerabilities & anomalies

Effectiveness: SOAR Partial

Dynamic Analysis with Automated Results Interpretation

According to SOAR [REF-1479], the following detection techniques may be useful:

Cost effective for partial coverage:

Host-based Vulnerability Scanners - Examine configuration for flaws, verifying that audit mechanisms work, ensure host configuration meets certain predefined criteria

Web Application Scanner

Web Services Scanner

Database Scanners

Effectiveness: SOAR Partial

Dynamic Analysis with Manual Results Interpretation

According to SOAR [REF-1479], the following detection techniques may be useful:

Highly cost effective:

Host Application Interface Scanner

Cost effective for partial coverage:

Fuzz Tester

Framework-based Fuzzer

Automated Monitored Execution

Forced Path Execution

Effectiveness: High

Manual Static Analysis - Source Code

According to SOAR [REF-1479], the following detection techniques may be useful:

Highly cost effective:

Manual Source Code Review (not inspections)

Cost effective for partial coverage:

Focused Manual Spotcheck - Focused manual analysis of source

Effectiveness: High

Automated Static Analysis - Source Code

According to SOAR [REF-1479], the following detection techniques may be useful:

Cost effective for partial coverage:

Context-configured Source Code Weakness Analyzer

Effectiveness: SOAR Partial

Automated Static Analysis

According to SOAR [REF-1479], the following detection techniques may be useful:

Cost effective for partial coverage:

Configuration Checker

Effectiveness: SOAR Partial

Architecture or Design Review

According to SOAR [REF-1479], the following detection techniques may be useful:

Highly cost effective:

Formal Methods / Correct-By-Construction

Cost effective for partial coverage:

Inspection (IEEE 1028 standard) (can apply to requirements, design, source code, etc.)

Effectiveness: High

Notes

Maintenance

As of CWE 4.19, this entry is being considered for deprecation or significant revision. Its name and description are inconsistent. The name is more general, and the description is more specific. The description emphasizes the installation phase only; mentions only files; and emphasizes modification of those files. The name applies to any type of resource, does not mention the specific permissions, and could be relevant to any SDLC phase.

Content history
Submission: PLOVER · 2006-07-19 · CWE Draft 3
Contribution: "Mapping CWE to 62443" Sub-Working Group · CWE-CAPEC ICS/OT SIG · 2023-04-25 · CWE 4.11

Suggested mappings to ISA/IEC 62443.

Contribution: Abhi Balakrishnan · 2024-09-29 · CWE 4.19

Contributed usability diagram concepts used by the CWE team

Modification: Eric Dalci · Cigital · 2008-07-01 · CWE 1.0

updated Time_of_Introduction

Modification: CWE Content Team · MITRE · 2008-09-08 · CWE 1.0

updated Relationships, Taxonomy_Mappings, Weakness_Ordinalities

Modification: CWE Content Team · MITRE · 2008-11-24 · CWE 1.1

updated Relationships, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2009-05-27 · CWE 1.4

updated Description, Name

Modification: CWE Content Team · MITRE · 2011-06-01 · CWE 1.13

updated Common_Consequences, Relationships, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2011-09-13 · CWE 2.1

updated Relationships, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2012-05-11 · CWE 2.2

updated References, Related_Attack_Patterns, Relationships, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2012-10-30 · CWE 2.3

updated Potential_Mitigations

Modification: CWE Content Team · MITRE · 2014-07-30 · CWE 2.8

updated Detection_Factors, Relationships

Modification: CWE Content Team · MITRE · 2017-05-03 · CWE 2.11

updated Related_Attack_Patterns

Modification: CWE Content Team · MITRE · 2017-11-08 · CWE 3.0

updated Applicable_Platforms, Causal_Nature, Modes_of_Introduction, Relationships, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2019-01-03 · CWE 3.2

updated Relationships, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2019-06-20 · CWE 3.3

updated Relationships, Type

Modification: CWE Content Team · MITRE · 2020-02-24 · CWE 4.0

updated Applicable_Platforms, Description, Detection_Factors, Relationships

Modification: CWE Content Team · MITRE · 2020-08-20 · CWE 4.2

updated Description, Modes_of_Introduction, Potential_Mitigations

Modification: CWE Content Team · MITRE · 2020-12-10 · CWE 4.3

updated Potential_Mitigations

Modification: CWE Content Team · MITRE · 2021-07-20 · CWE 4.5

updated Relationships

Modification: CWE Content Team · MITRE · 2021-10-28 · CWE 4.6

updated Relationships

Modification: CWE Content Team · MITRE · 2022-04-28 · CWE 4.7

updated Relationships

Modification: CWE Content Team · MITRE · 2022-06-28 · CWE 4.8

updated Relationships

Modification: CWE Content Team · MITRE · 2023-01-31 · CWE 4.10

updated Applicable_Platforms

Modification: CWE Content Team · MITRE · 2023-04-27 · CWE 4.11

updated Relationships, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2023-06-29 · CWE 4.12

updated Mapping_Notes, Relationships

Modification: CWE Content Team · MITRE · 2025-09-09 · CWE 4.18

updated Detection_Factors, References

Modification: CWE Content Team · MITRE · 2025-12-11 · CWE 4.19

updated Diagram, Maintenance_Notes, Relationships

Modification: CWE Content Team · MITRE · 2026-01-21 · CWE 4.19.1

updated Relationships

Modification: CWE Content Team · MITRE · 2026-10-28 · CWE 5.0

updated Time_of_Introduction

2193 vulnerabilities reference this CWE, most recent first.

CVE-2026-129255 (GCVE-0-2026-129255)

Vulnerability from cvelistv5 – Published: 2026-11-14 12:30 – Updated: 2026-11-18 13:41
VLAI
Title
CoolerMaster MASTERPLUS+ Device Driver WinRing0x64.sys sub_11504 default permission
Summary
A vulnerability was identified in CoolerMaster MASTERPLUS+ 1.9.6. This affects the function sub_11504 in the library WinRing0x64.sys of the component Device Driver. The manipulation of the argument PhysicalAddress leads to incorrect default permissions. The attack can only be performed from a local environment. The vendor was contacted early about this disclosure but did not respond in any way.
SSVC
Exploitation: none Automatable: no Technical Impact: total
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-11-18 13:40 UTC
CWE
  • CWE-276 - Incorrect Default Permissions
  • CWE-266 - Incorrect Privilege Assignment
Assigner
VulDB CNA under the mitre root
CNA scorecard B 83/100 over 3776 records in the last 180 days details
References
URL Tags
https://vuldb.com/vuln/437286 vdb-entrytechnical-description
https://vuldb.com/vuln/437286/cti signaturepermissions-required
https://vuldb.com/cve/CVE-2026-129255 third-party-advisory
https://vuldb.com/submit/1042970 third-party-advisory
Impacted products
Vendor Product Version
CoolerMaster MASTERPLUS+ Affected: 1.9.6
    cpe:2.3:a:coolermaster:masterplus_:*:*:*:*:*:*:*:*
Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-129255",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "total"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-11-18T13:40:30.407781Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-11-18T13:41:42.632Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "cpes": [
            "cpe:2.3:a:coolermaster:masterplus_:*:*:*:*:*:*:*:*"
          ],
          "modules": [
            "Device Driver"
          ],
          "product": "MASTERPLUS+",
          "vendor": "CoolerMaster",
          "versions": [
            {
              "status": "affected",
              "version": "1.9.6"
            }
          ]
        }
      ],
      "credits": [
        {
          "lang": "en",
          "type": "reporter",
          "value": "Element2023H (VulDB User)"
        },
        {
          "lang": "en",
          "type": "coordinator",
          "value": "VulDB CNA Team"
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "A vulnerability was identified in CoolerMaster MASTERPLUS+ 1.9.6. This affects the function sub_11504 in the library WinRing0x64.sys of the component Device Driver. The manipulation of the argument PhysicalAddress leads to incorrect default permissions. The attack can only be performed from a local environment. The vendor was contacted early about this disclosure but did not respond in any way."
        }
      ],
      "metrics": [
        {
          "cvssV4_0": {
            "baseScore": 9.3,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:4.0/AV:L/AC:L/AT:N/PR:L/UI:N/VC:H/VI:H/VA:H/SC:H/SI:H/SA:H/E:X",
            "version": "4.0"
          }
        },
        {
          "cvssV3_1": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H/E:X/RL:X/RC:C",
            "version": "3.1"
          }
        },
        {
          "cvssV3_0": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H/E:X/RL:X/RC:C",
            "version": "3.0"
          }
        },
        {
          "cvssV2_0": {
            "baseScore": 6.8,
            "vectorString": "AV:L/AC:L/Au:S/C:C/I:C/A:C/E:ND/RL:ND/RC:C",
            "version": "2.0"
          }
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-276",
              "description": "Incorrect Default Permissions",
              "lang": "en",
              "type": "CWE"
            }
          ]
        },
        {
          "descriptions": [
            {
              "cweId": "CWE-266",
              "description": "Incorrect Privilege Assignment",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-11-14T12:30:17.941Z",
        "orgId": "1af790b2-7ee1-4545-860a-a788eba489b5",
        "shortName": "VulDB"
      },
      "references": [
        {
          "name": "VDB-437286 | CoolerMaster MASTERPLUS+ Device Driver WinRing0x64.sys sub_11504 default permission",
          "tags": [
            "vdb-entry",
            "technical-description"
          ],
          "url": "https://vuldb.com/vuln/437286"
        },
        {
          "name": "VDB-437286 | CTI Indicators (IOB, IOC, TTP, IOA)",
          "tags": [
            "signature",
            "permissions-required"
          ],
          "url": "https://vuldb.com/vuln/437286/cti"
        },
        {
          "name": "CVE-2026-129255 | CVE Analysis and Report",
          "tags": [
            "third-party-advisory"
          ],
          "url": "https://vuldb.com/cve/CVE-2026-129255"
        },
        {
          "name": "Submit #1042970 | CoolerMaster MASTERPLUS+ 1.9.6 Incorrect Default Permissions",
          "tags": [
            "third-party-advisory"
          ],
          "url": "https://vuldb.com/submit/1042970"
        }
      ],
      "timeline": [
        {
          "lang": "en",
          "time": "2026-11-13T00:00:00.000Z",
          "value": "Advisory disclosed"
        },
        {
          "lang": "en",
          "time": "2026-11-13T01:00:00.000Z",
          "value": "VulDB entry created"
        },
        {
          "lang": "en",
          "time": "2026-11-13T20:47:02.000Z",
          "value": "VulDB entry last update"
        }
      ],
      "title": "CoolerMaster MASTERPLUS+ Device Driver WinRing0x64.sys sub_11504 default permission",
      "x_generator": [
        "VulDB PVTS v202611"
      ]
    }
  },
  "cveMetadata": {
    "assignerOrgId": "1af790b2-7ee1-4545-860a-a788eba489b5",
    "assignerShortName": "VulDB",
    "cveId": "CVE-2026-129255",
    "datePublished": "2026-11-14T12:30:17.941Z",
    "dateReserved": "2026-11-13T19:41:55.077Z",
    "dateUpdated": "2026-11-18T13:41:42.632Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

CVE-2026-129137 (GCVE-0-2026-129137)

Vulnerability from cvelistv5 – Published: 2026-11-13 21:22 – Updated: 2026-11-16 14:27
VLAI
Summary
Incorrect default permissions in the agent configuration folder in Devolutions PowerShell Universal 2026.3.4 and earlier allows a local unprivileged user to execute arbitrary code as SYSTEM via a crafted agent configuration file that points the agent to an attacker-controlled server.
SSVC
Exploitation: none Automatable: no Technical Impact: total
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-11-16 14:27 UTC
CWE
  • CWE-276 - Incorrect Default Permissions
Assigner
DEVOLUTIONS CNA under the mitre root
CNA scorecard E 44/100 over 67 records in the last 180 days details
Impacted products
Vendor Product Version
Devolutions PowerShell Universal Affected: 0 , < 2026.3.5 (custom)
Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "cvssV3_1": {
              "attackComplexity": "LOW",
              "attackVector": "LOCAL",
              "availabilityImpact": "HIGH",
              "baseScore": 7.8,
              "baseSeverity": "HIGH",
              "confidentialityImpact": "HIGH",
              "integrityImpact": "HIGH",
              "privilegesRequired": "LOW",
              "scope": "UNCHANGED",
              "userInteraction": "NONE",
              "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
              "version": "3.1"
            }
          },
          {
            "other": {
              "content": {
                "id": "CVE-2026-129137",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "total"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-11-16T14:27:13.425116Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-11-16T14:27:18.580Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "PowerShell Universal",
          "vendor": "Devolutions",
          "versions": [
            {
              "lessThan": "2026.3.5",
              "status": "affected",
              "version": "0",
              "versionType": "custom"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "supportingMedia": [
            {
              "base64": false,
              "type": "text/html",
              "value": "Incorrect default permissions in the agent configuration folder in Devolutions PowerShell Universal 2026.3.4 and earlier allows a local unprivileged user to execute arbitrary code as SYSTEM via a crafted agent configuration file that points the agent to an attacker-controlled server."
            }
          ],
          "value": "Incorrect default permissions in the agent configuration folder in Devolutions PowerShell Universal 2026.3.4 and earlier allows a local unprivileged user to execute arbitrary code as SYSTEM via a crafted agent configuration file that points the agent to an attacker-controlled server."
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-276",
              "description": "CWE-276 Incorrect Default Permissions",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-11-13T21:22:47.164Z",
        "orgId": "bfee16bd-18e6-446c-9a65-f5b2e3d89c23",
        "shortName": "DEVOLUTIONS"
      },
      "references": [
        {
          "url": "https://devolutions.net/security/advisories/DEVO-2026-0042/"
        }
      ],
      "source": {
        "discovery": "UNKNOWN"
      },
      "x_generator": {
        "engine": "Vulnogram 1.0.2"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "bfee16bd-18e6-446c-9a65-f5b2e3d89c23",
    "assignerShortName": "DEVOLUTIONS",
    "cveId": "CVE-2026-129137",
    "datePublished": "2026-11-13T21:22:47.164Z",
    "dateReserved": "2026-11-13T16:27:13.602Z",
    "dateUpdated": "2026-11-16T14:27:18.580Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

CVE-2026-126785 (GCVE-0-2026-126785)

Vulnerability from cvelistv5 – Published: 2026-11-12 00:30 – Updated: 2026-11-13 00:02
VLAI
Title
rmalright TR-VISION HOME IOCTL WFanManager.sys sub_11504 default permission
Summary
A vulnerability has been found in rmalright TR-VISION HOME 2.0.5. Impacted is the function sub_11504 in the library WFanManager.sys of the component IOCTL Handler. Such manipulation leads to incorrect default permissions. The attack must be carried out locally. The vendor was contacted early about this disclosure but did not respond in any way.
SSVC
Exploitation: none Automatable: no Technical Impact: total
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-11-13 00:01 UTC
CWE
  • CWE-276 - Incorrect Default Permissions
  • CWE-266 - Incorrect Privilege Assignment
Assigner
VulDB CNA under the mitre root
CNA scorecard B 83/100 over 3776 records in the last 180 days details
References
URL Tags
https://vuldb.com/vuln/435969 vdb-entrytechnical-description
https://vuldb.com/vuln/435969/cti signaturepermissions-required
https://vuldb.com/cve/CVE-2026-126785 third-party-advisory
https://vuldb.com/submit/1040412 third-party-advisory
Impacted products
Vendor Product Version
rmalright TR-VISION HOME Affected: 2.0.5
    cpe:2.3:a:rmalright:tr-vision_home:*:*:*:*:*:*:*:*
Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-126785",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "total"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-11-13T00:01:50.351489Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-11-13T00:02:01.644Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "cpes": [
            "cpe:2.3:a:rmalright:tr-vision_home:*:*:*:*:*:*:*:*"
          ],
          "modules": [
            "IOCTL Handler"
          ],
          "product": "TR-VISION HOME",
          "vendor": "rmalright",
          "versions": [
            {
              "status": "affected",
              "version": "2.0.5"
            }
          ]
        }
      ],
      "credits": [
        {
          "lang": "en",
          "type": "reporter",
          "value": "Element2023H (VulDB User)"
        },
        {
          "lang": "en",
          "type": "coordinator",
          "value": "VulDB CNA Team"
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "A vulnerability has been found in rmalright TR-VISION HOME 2.0.5. Impacted is the function sub_11504 in the library WFanManager.sys of the component IOCTL Handler. Such manipulation leads to incorrect default permissions. The attack must be carried out locally. The vendor was contacted early about this disclosure but did not respond in any way."
        }
      ],
      "metrics": [
        {
          "cvssV4_0": {
            "baseScore": 9.3,
            "baseSeverity": "CRITICAL",
            "vectorString": "CVSS:4.0/AV:L/AC:L/AT:N/PR:L/UI:N/VC:H/VI:H/VA:H/SC:H/SI:H/SA:H/E:X",
            "version": "4.0"
          }
        },
        {
          "cvssV3_1": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H/E:X/RL:X/RC:C",
            "version": "3.1"
          }
        },
        {
          "cvssV3_0": {
            "baseScore": 8.8,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H/E:X/RL:X/RC:C",
            "version": "3.0"
          }
        },
        {
          "cvssV2_0": {
            "baseScore": 6.8,
            "vectorString": "AV:L/AC:L/Au:S/C:C/I:C/A:C/E:ND/RL:ND/RC:C",
            "version": "2.0"
          }
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-276",
              "description": "Incorrect Default Permissions",
              "lang": "en",
              "type": "CWE"
            }
          ]
        },
        {
          "descriptions": [
            {
              "cweId": "CWE-266",
              "description": "Incorrect Privilege Assignment",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-11-12T00:30:24.749Z",
        "orgId": "1af790b2-7ee1-4545-860a-a788eba489b5",
        "shortName": "VulDB"
      },
      "references": [
        {
          "name": "VDB-435969 | rmalright TR-VISION HOME IOCTL WFanManager.sys sub_11504 default permission",
          "tags": [
            "vdb-entry",
            "technical-description"
          ],
          "url": "https://vuldb.com/vuln/435969"
        },
        {
          "name": "VDB-435969 | CTI Indicators (IOB, IOC, TTP, IOA)",
          "tags": [
            "signature",
            "permissions-required"
          ],
          "url": "https://vuldb.com/vuln/435969/cti"
        },
        {
          "name": "CVE-2026-126785 | CVE Analysis and Report",
          "tags": [
            "third-party-advisory"
          ],
          "url": "https://vuldb.com/cve/CVE-2026-126785"
        },
        {
          "name": "Submit #1040412 | Thermalright  TR-VISION HOME Software V2.0.5 Incorrect Default Permissions",
          "tags": [
            "third-party-advisory"
          ],
          "url": "https://vuldb.com/submit/1040412"
        }
      ],
      "timeline": [
        {
          "lang": "en",
          "time": "2026-11-11T00:00:00.000Z",
          "value": "Advisory disclosed"
        },
        {
          "lang": "en",
          "time": "2026-11-11T01:00:00.000Z",
          "value": "VulDB entry created"
        },
        {
          "lang": "en",
          "time": "2026-11-11T20:21:58.000Z",
          "value": "VulDB entry last update"
        }
      ],
      "title": "rmalright TR-VISION HOME IOCTL WFanManager.sys sub_11504 default permission",
      "x_generator": [
        "VulDB PVTS v202611"
      ]
    }
  },
  "cveMetadata": {
    "assignerOrgId": "1af790b2-7ee1-4545-860a-a788eba489b5",
    "assignerShortName": "VulDB",
    "cveId": "CVE-2026-126785",
    "datePublished": "2026-11-12T00:30:24.749Z",
    "dateReserved": "2026-11-11T19:16:48.153Z",
    "dateUpdated": "2026-11-13T00:02:01.644Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

CVE-2026-126675 (GCVE-0-2026-126675)

Vulnerability from cvelistv5 – Published: 2026-11-18 17:10 – Updated: 2026-11-19 10:46
VLAI
Title
Nitro PDF Pro: Incorrect default permissions allow local privilege escalation
Summary
Incorrect default permissions in Nitro PDF Pro before 26.4 on Windows allow a local low-privileged user to execute code in the context of another user who launches the application.
SSVC
Exploitation: none Automatable: no Technical Impact: total
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-11-18 18:59 UTC
CWE
  • CWE-276 - Incorrect Default Permissions
Assigner
Nitro CNA under the ENISA root
CNA scorecard – unranked: 1 record in the last 180 days, 10 needed details
References
Impacted products
Vendor Product Version
Nitro Nitro PDF Pro Affected: 0 , < 26.4 (custom)
Create a notification for this product.
Date Public
2026-11-19 14:00
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-126675",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "total"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-11-18T18:59:09.111838Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-11-18T18:59:24.783Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "platforms": [
            "Windows"
          ],
          "product": "Nitro PDF Pro",
          "vendor": "Nitro",
          "versions": [
            {
              "lessThan": "26.4",
              "status": "affected",
              "version": "0",
              "versionType": "custom"
            }
          ]
        }
      ],
      "credits": [
        {
          "lang": "en",
          "type": "finder",
          "value": "Harshil Nayi"
        }
      ],
      "datePublic": "2026-11-19T14:00:00.000Z",
      "descriptions": [
        {
          "lang": "en",
          "supportingMedia": [
            {
              "base64": false,
              "type": "text/html",
              "value": "Incorrect default permissions in Nitro PDF Pro before 26.4 on Windows allow a local low-privileged user to execute code in the context of another user who launches the application."
            }
          ],
          "value": "Incorrect default permissions in Nitro PDF Pro before 26.4 on Windows allow a local low-privileged user to execute code in the context of another user who launches the application."
        }
      ],
      "impacts": [
        {
          "capecId": "CAPEC-233",
          "descriptions": [
            {
              "lang": "en",
              "value": "CAPEC-233 Privilege Escalation"
            }
          ]
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "format": "CVSS",
          "scenarios": [
            {
              "lang": "en",
              "value": "GENERAL"
            }
          ]
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-276",
              "description": "CWE-276 Incorrect Default Permissions",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-11-19T10:46:54.534Z",
        "orgId": "fbbbf0fe-eb50-45e3-9c51-e027da15efb7",
        "shortName": "Nitro"
      },
      "references": [
        {
          "url": "https://www.gonitro.com/documentation/release-notes"
        }
      ],
      "source": {
        "discovery": "EXTERNAL"
      },
      "title": "Nitro PDF Pro: Incorrect default permissions allow local privilege escalation",
      "x_generator": {
        "engine": "Vulnogram 1.0.5"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "fbbbf0fe-eb50-45e3-9c51-e027da15efb7",
    "assignerShortName": "Nitro",
    "cveId": "CVE-2026-126675",
    "datePublished": "2026-11-18T17:10:59.201Z",
    "dateReserved": "2026-11-11T13:09:34.418Z",
    "dateUpdated": "2026-11-19T10:46:54.534Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

CVE-2026-126625 (GCVE-0-2026-126625)

Vulnerability from cvelistv5 – Published: 2026-11-11 08:31 – Updated: 2026-11-16 18:16
VLAI
Title
Incorrect Default Permissions in hMailServer
Summary
Incorrect default permissions in the Windows installer of Progressive Robot hMailServer 6.3.7 allow a local authenticated user to run code as the administrator who installs the product, when it is installed into a new program folder in a location whose permissions let every user write, such as the root of a drive. 6.3.7 fixed CVE-2026-107571 by giving the program folder, Bin and ControlPanel permissions that only administrators may change, but its setup lets Inno Setup make a new program folder first, with the permissions the folder above hands down, and replaces them only afterwards, tens of milliseconds later (33 to 139 milliseconds in the project's test runs). In that time any local account may make files and folders in the new folder, which keep that account as their owner, among them the Bin folder that setup then copies the programs into. Setup runs programs from Bin with the administrator's elevated rights, registering the service among them, before its hardening at the end of setup takes such a folder back, and those programs load a library placed in Bin in place of the system's. The default installation under Program Files, whose folders give ordinary users read and execute only, is not affected.
SSVC
Exploitation: none Automatable: no Technical Impact: total
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-11-16 16:04 UTC
CWE
  • CWE-276 - Incorrect Default Permissions
Assigner
GitLab CNA under the mitre root
CNA scorecard C 74/100 over 377 records in the last 180 days details
Impacted products
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-126625",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "total"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-11-16T16:04:35.162871Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-11-16T18:16:22.584Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "hMailServer",
          "repo": "https://gitlab.com/hmailserver/hmailserver",
          "vendor": "Progressive Robot Ltd",
          "versions": [
            {
              "status": "affected",
              "version": "6.3.7"
            }
          ]
        }
      ],
      "credits": [
        {
          "lang": "en",
          "type": "finder",
          "value": "Found by the hMailServer project (Progressive Robot Ltd)"
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "Incorrect default permissions in the Windows installer of Progressive Robot hMailServer 6.3.7 allow a local authenticated user to run code as the administrator who installs the product, when it is installed into a new program folder in a location whose permissions let every user write, such as the root of a drive. 6.3.7 fixed CVE-2026-107571 by giving the program folder, Bin and ControlPanel permissions that only administrators may change, but its setup lets Inno Setup make a new program folder first, with the permissions the folder above hands down, and replaces them only afterwards, tens of milliseconds later (33 to 139 milliseconds in the project\u0027s test runs). In that time any local account may make files and folders in the new folder, which keep that account as their owner, among them the Bin folder that setup then copies the programs into. Setup runs programs from Bin with the administrator\u0027s elevated rights, registering the service among them, before its hardening at the end of setup takes such a folder back, and those programs load a library placed in Bin in place of the system\u0027s. The default installation under Program Files, whose folders give ordinary users read and execute only, is not affected."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "attackComplexity": "HIGH",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "format": "CVSS",
          "scenarios": [
            {
              "lang": "en",
              "value": "GENERAL"
            }
          ]
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-276",
              "description": "CWE-276: Incorrect Default Permissions",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-11-11T08:31:57.131Z",
        "orgId": "ceab7361-8a18-47b1-92ba-4d7d25f6715a",
        "shortName": "GitLab"
      },
      "references": [
        {
          "url": "https://gitlab.com/hmailserver/hmailserver/-/work_items/78"
        },
        {
          "url": "https://gitlab.com/hmailserver/hmailserver/-/releases/v6.3.8"
        },
        {
          "url": "https://www.cve.org/CVERecord?id=CVE-2026-107571"
        }
      ],
      "solutions": [
        {
          "lang": "en",
          "value": "Upgrade to hMailServer 6.3.8, whose setup makes a new program folder, every folder above it that is not there, and Bin and ControlPanel in it, with permissions of their own from the moment each exists - SYSTEM and the Administrators full control, Users read and execute, nothing inherited, the Administrators the owner - before Inno Setup makes a folder or copies a file, each made by its name relative to the folder above it, which setup holds open. Until then, install hMailServer under Program Files, or into a new folder inside a folder that only administrators may change. To install elsewhere, first make the program folder from an elevated Command Prompt and give it a protected set of permissions - icacls \"\u003cprogram folder\u003e\" /inheritance:r /grant:r *S-1-5-18:(OI)(CI)F *S-1-5-32-544:(OI)(CI)F *S-1-5-32-545:(OI)(CI)RX, then icacls \"\u003cprogram folder\u003e\" /setowner *S-1-5-32-544 - check with dir /q /a \"\u003cprogram folder\u003e\" that nothing has been made in it, and restart Windows before running setup, so that nothing opened in it before its permissions were set stays open."
        }
      ],
      "title": "Incorrect Default Permissions in hMailServer"
    }
  },
  "cveMetadata": {
    "assignerOrgId": "ceab7361-8a18-47b1-92ba-4d7d25f6715a",
    "assignerShortName": "GitLab",
    "cveId": "CVE-2026-126625",
    "datePublished": "2026-11-11T08:31:57.131Z",
    "dateReserved": "2026-11-11T08:31:07.141Z",
    "dateUpdated": "2026-11-16T18:16:22.584Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

CVE-2026-126622 (GCVE-0-2026-126622)

Vulnerability from cvelistv5 – Published: 2026-11-11 08:31 – Updated: 2026-11-16 18:16
VLAI
Title
Incorrect Default Permissions in hMailServer
Summary
Incorrect default permissions in the Windows installer of Progressive Robot hMailServer 6.3.7 allow a local authenticated user to run code as the administrator who runs setup, when the server is installed into a program folder that is already there and that accounts other than the administrators could write, such as a folder made beforehand at the root of a drive, or when such an installation is upgraded or repaired. 6.3.7 fixed CVE-2026-107571 by giving the program folder, Bin and ControlPanel permissions that only administrators may change, but for a folder that is already there it does so only at the end of setup: setup first copies the programs into Bin, which every user may still write, and runs programs from Bin with the administrator's elevated rights, registering the service among them, before that hardening, so that a library another account places in Bin meanwhile is loaded in place of the system's. A handle an account opened on such a folder while it could write it keeps that access after the hardening. The default installation under Program Files, whose folders give ordinary users read and execute only, is not affected.
SSVC
Exploitation: none Automatable: no Technical Impact: total
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-11-16 16:04 UTC
CWE
  • CWE-276 - Incorrect Default Permissions
Assigner
GitLab CNA under the mitre root
CNA scorecard C 74/100 over 377 records in the last 180 days details
Impacted products
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-126622",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "total"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-11-16T16:04:24.147400Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-11-16T18:16:41.250Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "hMailServer",
          "repo": "https://gitlab.com/hmailserver/hmailserver",
          "vendor": "Progressive Robot Ltd",
          "versions": [
            {
              "status": "affected",
              "version": "6.3.7"
            }
          ]
        }
      ],
      "credits": [
        {
          "lang": "en",
          "type": "finder",
          "value": "Found by the hMailServer project (Progressive Robot Ltd)"
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "Incorrect default permissions in the Windows installer of Progressive Robot hMailServer 6.3.7 allow a local authenticated user to run code as the administrator who runs setup, when the server is installed into a program folder that is already there and that accounts other than the administrators could write, such as a folder made beforehand at the root of a drive, or when such an installation is upgraded or repaired. 6.3.7 fixed CVE-2026-107571 by giving the program folder, Bin and ControlPanel permissions that only administrators may change, but for a folder that is already there it does so only at the end of setup: setup first copies the programs into Bin, which every user may still write, and runs programs from Bin with the administrator\u0027s elevated rights, registering the service among them, before that hardening, so that a library another account places in Bin meanwhile is loaded in place of the system\u0027s. A handle an account opened on such a folder while it could write it keeps that access after the hardening. The default installation under Program Files, whose folders give ordinary users read and execute only, is not affected."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 7.3,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "format": "CVSS",
          "scenarios": [
            {
              "lang": "en",
              "value": "GENERAL"
            }
          ]
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-276",
              "description": "CWE-276: Incorrect Default Permissions",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-11-11T08:31:37.129Z",
        "orgId": "ceab7361-8a18-47b1-92ba-4d7d25f6715a",
        "shortName": "GitLab"
      },
      "references": [
        {
          "url": "https://gitlab.com/hmailserver/hmailserver/-/work_items/78"
        },
        {
          "url": "https://gitlab.com/hmailserver/hmailserver/-/releases/v6.3.8"
        },
        {
          "url": "https://www.cve.org/CVERecord?id=CVE-2026-107571"
        }
      ],
      "solutions": [
        {
          "lang": "en",
          "value": "Upgrade to hMailServer 6.3.8, whose setup hardens a program folder, Bin and ControlPanel that are already there before it stops the service, copies a file or runs a program of the installation, reading each through a handle it holds; refuses to install into one it cannot harden, or one another account owns that is not the earlier installation\u0027s; makes an empty Bin or ControlPanel again rather than use it; and, where another account could change one of the program\u0027s folders before this installation, hardens it and refuses to install until Windows has restarted, which closes any handle opened while it could. Until then, install hMailServer under Program Files, or into a new folder inside one that only administrators may change. Before running setup into or over a program folder in a location other accounts can write, follow from an elevated Command Prompt the steps in the hMailServer documentation, ServiceAccount.md, \"Before upgrading an installation at a drive\u0027s root\", which make the program folder, Bin and ControlPanel the Administrators\u0027 with a protected set of permissions, then restart Windows before running setup. Where accounts that are not administrators could change the folder before, reinstall into a new folder as that page\u0027s \"Reinstalling into a new folder\" says."
        }
      ],
      "title": "Incorrect Default Permissions in hMailServer"
    }
  },
  "cveMetadata": {
    "assignerOrgId": "ceab7361-8a18-47b1-92ba-4d7d25f6715a",
    "assignerShortName": "GitLab",
    "cveId": "CVE-2026-126622",
    "datePublished": "2026-11-11T08:31:37.129Z",
    "dateReserved": "2026-11-11T08:30:47.169Z",
    "dateUpdated": "2026-11-16T18:16:41.250Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

CVE-2026-124848 (GCVE-0-2026-124848)

Vulnerability from cvelistv5 – Published: 2026-11-10 20:03 – Updated: 2026-11-16 19:51
VLAI
Title
Incorrect default permissions on session transcripts and prompt history in Kiro CLI
Summary
Incorrect default file permissions in Kiro CLI (formerly Amazon Q Developer CLI) before version 2.27.0 on macOS and Linux might allow other local users on the same host to read a user's session transcripts and prompt history, including any credentials or source code they contain. The CLI created its local session storage files with permissions that made them readable by all local users. To remediate this issue, users should upgrade to Kiro CLI version 2.27.0 or later and launch it once. Users who ran Amazon Q Developer CLI 1.16.0 through 1.19.x should also delete the ~/.aws/amazonq/.cli_bash_history file or restrict it to the owner.
SSVC
Exploitation: none Automatable: no Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-11-16 19:51 UTC
CWE
  • CWE-276 - Incorrect default permissions
Assigner
AMZN CNA under the mitre root
CNA scorecard A 94/100 over 170 records in the last 180 days details
References
Impacted products
Vendor Product Version
Amazon Kiro CLI Affected: 1.16.0 , < 2.27.0 (custom)
    cpe:2.3:a:amazon:kiro_cli:*:*:*:*:*:*:*:*
Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-124848",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-11-16T19:51:29.096477Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-11-16T19:51:55.877Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Kiro CLI",
          "vendor": "Amazon",
          "versions": [
            {
              "lessThan": "2.27.0",
              "status": "affected",
              "version": "1.16.0",
              "versionType": "custom"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:a:amazon:kiro_cli:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "2.27.0",
                  "versionStartIncluding": "1.16.0",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ],
          "operator": "OR"
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "supportingMedia": [
            {
              "base64": false,
              "type": "text/html",
              "value": "\u003cp\u003eIncorrect default file permissions in Kiro CLI (formerly Amazon Q Developer CLI) before version 2.27.0 on macOS and Linux might allow other local users on the same host to read a user\u0027s session transcripts and prompt history, including any credentials or source code they contain. The CLI created its local session storage files with permissions that made them readable by all local users.\u003c/p\u003e\u003cp\u003eTo remediate this issue, users should upgrade to Kiro CLI version 2.27.0 or later and launch it once. Users who ran Amazon Q Developer CLI 1.16.0 through 1.19.x should also delete the ~/.aws/amazonq/.cli_bash_history file or restrict it to the owner.\u003c/p\u003e"
            }
          ],
          "value": "Incorrect default file permissions in Kiro CLI (formerly Amazon Q Developer CLI) before version 2.27.0 on macOS and Linux might allow other local users on the same host to read a user\u0027s session transcripts and prompt history, including any credentials or source code they contain. The CLI created its local session storage files with permissions that made them readable by all local users.\n\n\n\nTo remediate this issue, users should upgrade to Kiro CLI version 2.27.0 or later and launch it once. Users who ran Amazon Q Developer CLI 1.16.0 through 1.19.x should also delete the ~/.aws/amazonq/.cli_bash_history file or restrict it to the owner."
        }
      ],
      "impacts": [
        {
          "capecId": "CAPEC-1",
          "descriptions": [
            {
              "lang": "en",
              "value": "CAPEC-1 Accessing Functionality Not Properly Constrained by ACLs"
            }
          ]
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "NONE",
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "NONE",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "format": "CVSS",
          "scenarios": [
            {
              "lang": "en",
              "value": "GENERAL"
            }
          ]
        },
        {
          "cvssV4_0": {
            "Automatable": "NOT_DEFINED",
            "Recovery": "NOT_DEFINED",
            "Safety": "NOT_DEFINED",
            "attackComplexity": "LOW",
            "attackRequirements": "NONE",
            "attackVector": "LOCAL",
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "exploitMaturity": "NOT_DEFINED",
            "privilegesRequired": "LOW",
            "providerUrgency": "NOT_DEFINED",
            "subAvailabilityImpact": "NONE",
            "subConfidentialityImpact": "NONE",
            "subIntegrityImpact": "NONE",
            "userInteraction": "NONE",
            "valueDensity": "NOT_DEFINED",
            "vectorString": "CVSS:4.0/AV:L/AC:L/AT:N/PR:L/UI:N/VC:H/VI:N/VA:N/SC:N/SI:N/SA:N",
            "version": "4.0",
            "vulnAvailabilityImpact": "NONE",
            "vulnConfidentialityImpact": "HIGH",
            "vulnIntegrityImpact": "NONE",
            "vulnerabilityResponseEffort": "NOT_DEFINED"
          },
          "format": "CVSS",
          "scenarios": [
            {
              "lang": "en",
              "value": "GENERAL"
            }
          ]
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-276",
              "description": "CWE-276 Incorrect default permissions",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-11-10T20:03:38.123Z",
        "orgId": "ff89ba41-3aa1-4d27-914a-91399e9639e5",
        "shortName": "AMZN"
      },
      "references": [
        {
          "tags": [
            "release-notes",
            "patch"
          ],
          "url": "https://kiro.dev/changelog/cli/2-27/"
        },
        {
          "tags": [
            "vendor-advisory"
          ],
          "url": "https://aws.amazon.com/security/security-bulletins/2026-178-aws/"
        }
      ],
      "source": {
        "discovery": "UNKNOWN"
      },
      "title": "Incorrect default permissions on session transcripts and prompt history in Kiro CLI",
      "x_generator": {
        "engine": "Vulnogram 0.5.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "ff89ba41-3aa1-4d27-914a-91399e9639e5",
    "assignerShortName": "AMZN",
    "cveId": "CVE-2026-124848",
    "datePublished": "2026-11-10T20:03:38.123Z",
    "dateReserved": "2026-11-09T14:25:09.034Z",
    "dateUpdated": "2026-11-16T19:51:55.877Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

CVE-2026-123505 (GCVE-0-2026-123505)

Vulnerability from cvelistv5 – Published: 2026-11-08 01:37 – Updated: 2026-11-10 18:00
VLAI
Title
Vikunja before 2.7.1 World-Readable Local File Storage and SQLite Database
Summary
Vikunja before 2.7.1 contains an insecure file permissions vulnerability that allows local users to read stored data because localStorage.Write creates blobs world-readable. Local attackers on a shared host can read attachments, project backgrounds and exports, and copy the SQLite database to crack password hashes offline.
SSVC
Exploitation: none Automatable: no Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-11-10 15:41 UTC
CWE
  • CWE-276 - Incorrect Default Permissions
Assigner
VulnCheck CNA under the mitre root
CNA scorecard B 84/100 over 8873 records in the last 180 days details
References
Impacted products
Vendor Product Version
go-vikunja vikunja Affected: 0 , < 2.7.1 (semver)
Unaffected: 2.7.1 (semver)
    cpe:2.3:a:vikunja:vikunja:*:*:*:*:*:*:*:*
Create a notification for this product.
Date Public
2026-10-22 00:00
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-123505",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-11-10T15:41:34.465108Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-11-10T18:00:17.615Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "packageURL": "pkg:golang/code.vikunja.io/api",
          "product": "vikunja",
          "vendor": "go-vikunja",
          "versions": [
            {
              "lessThan": "2.7.1",
              "status": "affected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "status": "unaffected",
              "version": "2.7.1",
              "versionType": "semver"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:a:vikunja:vikunja:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "2.7.1",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "datePublic": "2026-10-22T00:00:00.000Z",
      "descriptions": [
        {
          "lang": "en",
          "value": "Vikunja before 2.7.1 contains an insecure file permissions vulnerability that allows local users to read stored data because localStorage.Write creates blobs world-readable. Local attackers on a shared host can read attachments, project backgrounds and exports, and copy the SQLite database to crack password hashes offline."
        }
      ],
      "metrics": [
        {
          "cvssV4_0": {
            "attackComplexity": "LOW",
            "attackRequirements": "NONE",
            "attackVector": "LOCAL",
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "privilegesRequired": "LOW",
            "subAvailabilityImpact": "NONE",
            "subConfidentialityImpact": "NONE",
            "subIntegrityImpact": "NONE",
            "userInteraction": "NONE",
            "vectorString": "CVSS:4.0/AV:L/AC:L/AT:N/PR:L/UI:N/VC:H/VI:N/VA:N/SC:N/SI:N/SA:N",
            "version": "4.0",
            "vulnAvailabilityImpact": "NONE",
            "vulnConfidentialityImpact": "HIGH",
            "vulnIntegrityImpact": "NONE"
          },
          "format": "CVSS"
        },
        {
          "cvssV3_1": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "NONE",
            "baseScore": 5.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "NONE",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "format": "CVSS"
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-276",
              "description": "Incorrect Default Permissions",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-11-08T01:37:20.424Z",
        "orgId": "83251b91-4cc7-4094-a5c7-464a1b83ea10",
        "shortName": "VulnCheck"
      },
      "references": [
        {
          "name": "GitHub Security Advisory (GHSA-9rfw-7hv4-3vv3)",
          "tags": [
            "vendor-advisory"
          ],
          "url": "https://github.com/go-vikunja/vikunja/security/advisories/GHSA-9rfw-7hv4-3vv3"
        },
        {
          "name": "VulnCheck Advisory: Vikunja before 2.7.1 World-Readable Local File Storage and SQLite Database",
          "tags": [
            "third-party-advisory"
          ],
          "url": "https://www.vulncheck.com/advisories/vikunja-before-2.7.1-world-readable-local-file-storage-and-sqlite-database"
        }
      ],
      "title": "Vikunja before 2.7.1 World-Readable Local File Storage and SQLite Database",
      "x_generator": {
        "engine": "vulncheck-endgame"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "83251b91-4cc7-4094-a5c7-464a1b83ea10",
    "assignerShortName": "VulnCheck",
    "cveId": "CVE-2026-123505",
    "datePublished": "2026-11-08T01:37:20.424Z",
    "dateReserved": "2026-11-06T00:46:28.479Z",
    "dateUpdated": "2026-11-10T18:00:17.615Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

CVE-2026-123500 (GCVE-0-2026-123500)

Vulnerability from cvelistv5 – Published: 2026-11-08 01:37 – Updated: 2026-11-12 12:17
VLAI
Title
Vikunja before 2.7.1 Insecure Permissions on Dump Archive via vikunja dump
Summary
Vikunja before 2.7.1 contains an insecure file permissions vulnerability that allows local users to read dump archives created with umask permissions by the vikunja dump command. Local attackers on a shared host can read the world-readable zip in the rootpath to obtain config, password hashes, TOTP secrets, tokens, and stored files.
SSVC
Exploitation: none Automatable: no Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-11-12 12:10 UTC
CWE
  • CWE-276 - Incorrect Default Permissions
Assigner
VulnCheck CNA under the mitre root
CNA scorecard B 84/100 over 8873 records in the last 180 days details
References
Impacted products
Vendor Product Version
go-vikunja vikunja Affected: 0 , < 2.7.1 (semver)
Unaffected: 2.7.1 (semver)
    cpe:2.3:a:vikunja:vikunja:*:*:*:*:*:*:*:*
Create a notification for this product.
Date Public
2026-10-22 00:00
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-123500",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-11-12T12:10:53.314099Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-11-12T12:17:18.037Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "packageURL": "pkg:golang/code.vikunja.io/api",
          "product": "vikunja",
          "vendor": "go-vikunja",
          "versions": [
            {
              "lessThan": "2.7.1",
              "status": "affected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "status": "unaffected",
              "version": "2.7.1",
              "versionType": "semver"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:a:vikunja:vikunja:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "2.7.1",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "datePublic": "2026-10-22T00:00:00.000Z",
      "descriptions": [
        {
          "lang": "en",
          "value": "Vikunja before 2.7.1 contains an insecure file permissions vulnerability that allows local users to read dump archives created with umask permissions by the vikunja dump command. Local attackers on a shared host can read the world-readable zip in the rootpath to obtain config, password hashes, TOTP secrets, tokens, and stored files."
        }
      ],
      "metrics": [
        {
          "cvssV4_0": {
            "Automatable": "NOT_DEFINED",
            "Recovery": "NOT_DEFINED",
            "Safety": "NOT_DEFINED",
            "attackComplexity": "LOW",
            "attackRequirements": "NONE",
            "attackVector": "LOCAL",
            "baseScore": 6.9,
            "baseSeverity": "MEDIUM",
            "exploitMaturity": "NOT_DEFINED",
            "privilegesRequired": "NONE",
            "providerUrgency": "NOT_DEFINED",
            "subAvailabilityImpact": "NONE",
            "subConfidentialityImpact": "NONE",
            "subIntegrityImpact": "NONE",
            "userInteraction": "NONE",
            "valueDensity": "NOT_DEFINED",
            "vectorString": "CVSS:4.0/AV:L/AC:L/AT:N/PR:N/UI:N/VC:H/VI:N/VA:N/SC:N/SI:N/SA:N",
            "version": "4.0",
            "vulnAvailabilityImpact": "NONE",
            "vulnConfidentialityImpact": "HIGH",
            "vulnIntegrityImpact": "NONE",
            "vulnerabilityResponseEffort": "NOT_DEFINED"
          },
          "format": "CVSS"
        },
        {
          "cvssV3_1": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "NONE",
            "baseScore": 6.2,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "NONE",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N",
            "version": "3.1"
          },
          "format": "CVSS"
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-276",
              "description": "Incorrect Default Permissions",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-11-08T01:37:16.987Z",
        "orgId": "83251b91-4cc7-4094-a5c7-464a1b83ea10",
        "shortName": "VulnCheck"
      },
      "references": [
        {
          "name": "GitHub Security Advisory (GHSA-rp64-xg8g-9mpr)",
          "tags": [
            "vendor-advisory"
          ],
          "url": "https://github.com/go-vikunja/vikunja/security/advisories/GHSA-rp64-xg8g-9mpr"
        },
        {
          "name": "VulnCheck Advisory: Vikunja before 2.7.1 Insecure Permissions on Dump Archive via vikunja dump",
          "tags": [
            "third-party-advisory"
          ],
          "url": "https://www.vulncheck.com/advisories/vikunja-before-2.7.1-insecure-permissions-on-dump-archive-via-vikunja-dump"
        }
      ],
      "title": "Vikunja before 2.7.1 Insecure Permissions on Dump Archive via vikunja dump",
      "x_generator": {
        "engine": "vulncheck-endgame"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "83251b91-4cc7-4094-a5c7-464a1b83ea10",
    "assignerShortName": "VulnCheck",
    "cveId": "CVE-2026-123500",
    "datePublished": "2026-11-08T01:37:16.987Z",
    "dateReserved": "2026-11-06T00:45:39.026Z",
    "dateUpdated": "2026-11-12T12:17:18.037Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

CVE-2026-123040 (GCVE-0-2026-123040)

Vulnerability from cvelistv5 – Published: 2026-11-11 14:00 – Updated: 2026-11-12 04:56
VLAI
Summary
An attacker who gains the ability to execute arbitrary code on a system with TrueConf Server (Linux) versions from 4.7.2 up to, but not including, 5.5.6 installed, running as the user trueconf (by exploiting some other vulnerability), can elevate their privileges to root.
SSVC
Exploitation: none Automatable: no Technical Impact: total
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-11-11 00:00 UTC
CWE
  • CWE-276 - Incorrect Default Permissions
Assigner
Kaspersky CNA under the mitre root
CNA scorecard C 74/100 over 10 records in the last 180 days details
References
Impacted products
Vendor Product Version
TrueConf TrueConf Server Affected: 4.7.2 , < 5.5.6 (semver)
Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-123040",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "total"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-11-11T00:00:00+00:00",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-11-12T04:56:21.339Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "platforms": [
            "Linux"
          ],
          "product": "TrueConf Server",
          "vendor": "TrueConf",
          "versions": [
            {
              "lessThan": "5.5.6",
              "status": "affected",
              "version": "4.7.2",
              "versionType": "semver"
            }
          ]
        }
      ],
      "credits": [
        {
          "lang": "en",
          "type": "finder",
          "value": "Vyacheslav Kopeytsev from Kaspersky ICS CERT"
        },
        {
          "lang": "en",
          "type": "finder",
          "value": "Grigory Sablin from Kaspersky GERT"
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "An attacker who gains the ability to execute arbitrary code on a system with TrueConf Server (Linux) versions from 4.7.2 up to, but not including, 5.5.6 installed, running as the user trueconf (by exploiting some other vulnerability), can elevate their privileges to root."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "attackComplexity": "LOW",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 7.8,
            "baseSeverity": "HIGH",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "cvssV4_0": {
            "baseScore": 8.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:4.0/AV:L/AC:L/AT:N/PR:L/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N",
            "version": "4.0"
          },
          "format": "CVSS",
          "scenarios": [
            {
              "lang": "en",
              "value": "GENERAL"
            }
          ]
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-276",
              "description": "CWE-276: Incorrect Default Permissions",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-11-11T14:00:01.991Z",
        "orgId": "e45d732a-8f6b-4b6b-be76-7420f6a2b988",
        "shortName": "Kaspersky"
      },
      "references": [
        {
          "name": "KLCERT-26-059: TrueConf Server (Linux). Incorrect Default Permissions",
          "tags": [
            "third-party-advisory"
          ],
          "url": "https://ics-cert.kaspersky.com/advisories/2026/11/10/trueconf-server-linux-incorrect-default-permissions/"
        }
      ],
      "solutions": [
        {
          "lang": "en",
          "value": "Update TrueConf Server (Linux) to versions 5.5.6 or newer."
        }
      ],
      "timeline": [
        {
          "lang": "en",
          "time": "2026-08-11T00:00:00.000Z",
          "value": "Issue reported by Kaspersky ICS CERT to TrueConf"
        },
        {
          "lang": "en",
          "time": "2026-08-18T00:00:00.000Z",
          "value": "Issue confirmed by TrueConf"
        },
        {
          "lang": "en",
          "time": "2026-11-10T00:00:00.000Z",
          "value": "Advisory published by Kaspersky ICS CERT"
        }
      ],
      "workarounds": [
        {
          "lang": "en",
          "value": "Perform a full check with anti-virus software that has up-to-date anti-virus databases and software modules."
        }
      ]
    }
  },
  "cveMetadata": {
    "assignerOrgId": "e45d732a-8f6b-4b6b-be76-7420f6a2b988",
    "assignerShortName": "Kaspersky",
    "cveId": "CVE-2026-123040",
    "datePublished": "2026-11-11T14:00:01.991Z",
    "dateReserved": "2026-11-05T07:33:05.167Z",
    "dateUpdated": "2026-11-12T04:56:21.339Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2"
}

Mitigation MIT-1
Architecture and Design Operation

The architecture needs to access and modification attributes for files to only those users who actually require those actions.

Mitigation MIT-46
Architecture and Design

Strategy: Separation of Privilege

  • Compartmentalize the system to have "safe" areas where trust boundaries can be unambiguously drawn. Do not allow sensitive data to go outside of the trust boundary and always be careful when interfacing with a compartment outside of the safe area.
  • Ensure that appropriate compartmentalization is built into the system design, and the compartmentalization allows for and reinforces privilege separation functionality. Architects and designers should rely on the principle of least privilege to decide the appropriate time to use privileges and the time to drop privileges.
CAPEC-1: Accessing Functionality Not Properly Constrained by ACLs

In applications, particularly web applications, access to functionality is mitigated by an authorization framework. This framework maps Access Control Lists (ACLs) to elements of the application's functionality; particularly URL's for web apps. In the case that the administrator failed to specify an ACL for a particular element, an attacker may be able to access it with impunity. An attacker with the ability to access functionality not properly constrained by ACLs can obtain sensitive information and possibly compromise the entire application. Such an attacker can access resources that must be available only to users at a higher privilege level, can access management sections of the application, or can run queries for data that they otherwise not supposed to.

CAPEC-127: Directory Indexing

An adversary crafts a request to a target that results in the target listing/indexing the content of a directory as output. One common method of triggering directory contents as output is to construct a request containing a path that terminates in a directory name rather than a file name since many applications are configured to provide a list of the directory's contents when such a request is received. An adversary can use this to explore the directory tree on a target as well as learn the names of files. This can often end up revealing test files, backup files, temporary files, hidden files, configuration files, user accounts, script contents, as well as naming conventions, all of which can be used by an attacker to mount additional attacks.

CAPEC-81: Web Server Logs Tampering

Web Logs Tampering attacks involve an attacker injecting, deleting or otherwise tampering with the contents of web logs typically for the purposes of masking other malicious behavior. Additionally, writing malicious data to log files may target jobs, filters, reports, and other agents that process the logs in an asynchronous attack pattern. This pattern of attack is similar to "Log Injection-Tampering-Forging" except that in this case, the attack is targeting the logs of the web server and not the application.