CWE-798
Weakness Allowed-with-ReviewUse of Hard-coded Credentials
Abstraction: Base · Status: Draft
The product contains hard-coded credentials, such as a password or cryptographic key.
Technical nuance
There are two main variations:
Inbound: the product contains an authentication mechanism that checks the input credentials against a hard-coded set of credentials. In this variant, a default administration account is created, and a simple password is hard-coded into the product and associated with that account. This hard-coded password is the same for each installation of the product, and it usually cannot be changed or disabled by system administrators without manually modifying the program, or otherwise patching the product. It can also be difficult for the administrator to detect.
Outbound: the product connects to another system or component, and it contains hard-coded credentials for connecting to that component. This variant applies to front-end systems that authenticate with a back-end service. The back-end service may require a fixed password that can be easily discovered. The programmer may simply hard-code those back-end credentials into the front-end product.
Mapping guidance
While this entry is at a Base level of abstraction, it has lower-level children that cover specific kinds of credentials.
Consider children such as CWE-259 and CWE-321.
Relationships and members
Modes of introduction
REALIZATION: This weakness is caused during implementation of an architectural security tactic.
Detection methods
Black Box
Credential storage in configuration files is findable using black box methods, but the use of hard-coded credentials for an incoming authentication routine typically involves an account that is not visible outside of the code.
Effectiveness: Moderate
Automated Static Analysis
Automated white box techniques have been published for detecting hard-coded credentials for incoming authentication, but there is some expert disagreement regarding their effectiveness and applicability to a broad range of methods.
Manual Static Analysis
This weakness may be detectable using manual code analysis. Unless authentication is decentralized and applied throughout the product, there can be sufficient time for the analyst to find incoming authentication routines and examine the program logic looking for usage of hard-coded credentials. Configuration files could also be analyzed.
These may be more effective than strictly automated techniques. This is especially the case with weaknesses that are related to design and business rules.
Manual Dynamic Analysis
For hard-coded credentials in incoming authentication: use monitoring tools that examine the product's process as it interacts with the operating system and the network. This technique is useful in cases when source code is unavailable, if the product was not developed by you, or if you want to verify that the build phase did not introduce any new weaknesses. Examples include debuggers that directly attach to the running process; system-call tracing utilities such as truss (Solaris) and strace (Linux); system activity monitors such as FileMon, RegMon, Process Monitor, and other Sysinternals utilities (Windows); and sniffers and protocol analyzers that monitor network traffic.
Attach the monitor to the process and perform a login. Using call trees or similar artifacts from the output, examine the associated behaviors and see if any of them appear to be comparing the input to a fixed string or value.
Automated Static Analysis - Binary or Bytecode
According to SOAR [REF-1479], the following detection techniques may be useful:
Cost effective for partial coverage:
Bytecode Weakness Analysis - including disassembler + source code weakness analysis
Binary Weakness Analysis - including disassembler + source code weakness analysis
Effectiveness: SOAR Partial
Manual Static Analysis - Binary or Bytecode
According to SOAR [REF-1479], the following detection techniques may be useful:
Highly cost effective:
Binary / Bytecode disassembler - then use manual analysis for vulnerabilities & anomalies
Effectiveness: High
Dynamic Analysis with Manual Results Interpretation
According to SOAR [REF-1479], the following detection techniques may be useful:
Cost effective for partial coverage:
Network Sniffer
Forced Path Execution
Effectiveness: SOAR Partial
Manual Static Analysis - Source Code
According to SOAR [REF-1479], the following detection techniques may be useful:
Highly cost effective:
Focused Manual Spotcheck - Focused manual analysis of source
Manual Source Code Review (not inspections)
Effectiveness: High
Automated Static Analysis - Source Code
According to SOAR [REF-1479], the following detection techniques may be useful:
Highly cost effective:
Source code Weakness Analyzer
Context-configured Source Code Weakness Analyzer
Effectiveness: High
Automated Static Analysis
According to SOAR [REF-1479], the following detection techniques may be useful:
Cost effective for partial coverage:
Configuration Checker
Effectiveness: SOAR Partial
Architecture or Design Review
According to SOAR [REF-1479], the following detection techniques may be useful:
Highly cost effective:
Inspection (IEEE 1028 standard) (can apply to requirements, design, source code, etc.)
Formal Methods / Correct-By-Construction
Effectiveness: High
Content history
More abstract entry for hard-coded password and hard-coded cryptographic key.
Suggested mappings to ISA/IEC 62443.
Provided diagram to improve CWE usability
Contributed a PHP demonstrative example.
updated Related_Attack_Patterns
updated Common_Consequences, References
updated Potential_Mitigations
updated Description
updated Common_Consequences, Relationships, Taxonomy_Mappings
updated Observed_Examples, Relationships
updated Potential_Mitigations, Relationships
updated Demonstrative_Examples, Related_Attack_Patterns, Relationships, Taxonomy_Mappings
updated Demonstrative_Examples, Potential_Mitigations
updated Applicable_Platforms, References
updated Demonstrative_Examples, Detection_Factors
updated Relationships
updated Related_Attack_Patterns
updated Causal_Nature, Demonstrative_Examples, Likelihood_of_Exploit, Modes_of_Introduction, References, Relationships
updated References
updated References, Relationships, Taxonomy_Mappings
updated Related_Attack_Patterns, Relationships
updated Relationships
updated Applicable_Platforms, Relationships
updated Relationships
updated Relationships
updated Demonstrative_Examples
updated Relationships
updated Relationships
updated Relationships
updated Applicable_Platforms, Demonstrative_Examples, Observed_Examples, References, Relationships
updated Description, Detection_Factors, Maintenance_Notes, Potential_Mitigations, Taxonomy_Mappings
updated References, Relationships
updated Mapping_Notes, Relationships
updated Observed_Examples
updated Common_Consequences, Description, Diagram
updated Relationships
updated Detection_Factors, References
updated Maintenance_Notes, Mapping_Notes, Observed_Examples, Relationships
updated Applicable_Platforms, Demonstrative_Examples, Description, Observed_Examples, References, Relationships, Taxonomy_Mappings, Technical_Nuance
2571 vulnerabilities reference this CWE, most recent first.
GCVE-1337-2026-000000000… (CVE-2026-7414)
Vulnerability from gna-1337 – Published: 2026-05-07 16:10 – Updated: 2026-05-07 17:01- CWE-798 - Use of Hard-coded Credentials
| URL | Tags |
|---|---|
| https://github.com/Bin4ry/yarbo-nat-in-my-back-yard | third-party-advisory |
| https://takeonme.org/gcves/GCVE-1337-2026-0000000… | third-party-advisory |
| https://github.com/Bin4ry/yarbo-nat-in-my-back-ya… | exploit |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-7414",
"options": [
{
"Exploitation": "poc"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-05-07T17:01:33.390607Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-05-07T17:01:37.949Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"references": [
{
"tags": [
"exploit"
],
"url": "https://github.com/Bin4ry/yarbo-nat-in-my-back-yard#3--hardcoded-developer-credentials-in-production-apk"
}
],
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Firmware",
"vendor": "Yarbo",
"versions": [
{
"lessThanOrEqual": "2.3.9",
"status": "affected",
"version": "0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Andreas Makris (aka Bin4ry)"
},
{
"lang": "en",
"type": "coordinator",
"value": "todb of AHA!"
}
],
"datePublic": "2026-05-07T16:00:00.000Z",
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "Yarbo firmware v2.3.9 contains hardcoded administrative credentials embedded in the firmware image. These credentials are identical across all devices running this firmware and cannot be changed or removed by end users, enabling trivial unauthorized access to device management interfaces by anyone who knows them.\u003cbr\u003e"
}
],
"value": "Yarbo firmware v2.3.9 contains hardcoded administrative credentials embedded in the firmware image. These credentials are identical across all devices running this firmware and cannot be changed or removed by end users, enabling trivial unauthorized access to device management interfaces by anyone who knows them."
}
],
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 9.8,
"baseSeverity": "CRITICAL",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"format": "CVSS",
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-798",
"description": "CWE-798 Use of Hard-coded Credentials",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-05-07T16:10:02.349Z",
"orgId": "26969f82-7e87-44d8-9cb5-f6fb926ddd43",
"shortName": "AHA"
},
"references": [
{
"tags": [
"third-party-advisory"
],
"url": "https://github.com/Bin4ry/yarbo-nat-in-my-back-yard"
},
{
"tags": [
"third-party-advisory"
],
"url": "https://takeonme.org/gcves/GCVE-1337-2026-00000000000000000000000000000000000000000000000001111111111100011111111111000000000000000000000000000000000000000000000000000001000"
}
],
"source": {
"discovery": "EXTERNAL"
},
"title": "Hardcoded credentials in Yarbo robot firmware",
"x_gcve": [
{
"recordType": "advisory",
"vulnId": "gcve-1337-2026-00000000000000000000000000000000000000000000000001111111111100011111111111000000000000000000000000000000000000000000000000000001000"
}
],
"x_generator": {
"engine": "Vulnogram 1.0.2"
}
}
},
"cveMetadata": {
"assignerOrgId": "26969f82-7e87-44d8-9cb5-f6fb926ddd43",
"assignerShortName": "AHA",
"cveId": "CVE-2026-7414",
"datePublished": "2026-05-07T16:10:02.349Z",
"dateReserved": "2026-04-29T13:55:09.542Z",
"dateUpdated": "2026-05-07T17:01:37.949Z",
"serial": 1,
"state": "PUBLISHED",
"vulnId": "GCVE-1337-2026-00000000000000000000000000000000000000000000000001111111111100011111111111000000000000000000000000000000000000000000000000000001000"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
GCVE-1337-2026-000000000… (CVE-2026-105033)
Vulnerability from gna-1337 – Published: 2026-10-15 20:42 – Updated: 2026-10-15 20:42- CWE-798 - Use of Hard-coded Credentials
| URL | Tags |
|---|---|
| https://github.com/xn0tsa/your-secrets-are-safe-with-me | technical-description |
| https://takeonme.org/gcves/GCVE-1337-2026-0000000… | third-party-advisory |
| https://www.theverge.com/tech/1010727/eiliko-robo… | media-coverage |
| Vendor | Product | Version | |
|---|---|---|---|
| EnergizeLab | AI Station firmware (RK3562) |
Affected:
n/a
|
{
"containers": {
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "AI Station firmware (RK3562)",
"vendor": "EnergizeLab",
"versions": [
{
"status": "affected",
"version": "n/a"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Sammy Azdoufal"
},
{
"lang": "en",
"type": "coordinator",
"value": "todb of AHA!"
}
],
"datePublic": "2026-10-15T12:00:00.000Z",
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "The EnergizeLab AI Station (RK3562) firmware image ships with default root credentials and SSH enabled. An attacker with network access to the device can log in as root and take full control of it."
}
],
"value": "The EnergizeLab AI Station (RK3562) firmware image ships with default root credentials and SSH enabled. An attacker with network access to the device can log in as root and take full control of it."
}
],
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "ADJACENT_NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 8.8,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"format": "CVSS",
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
},
{
"other": {
"content": {
"options": [
{
"Exploitation": "poc"
},
{
"Automatable": "no"
},
{
"Technical Impact": "total"
}
],
"role": "CNA",
"version": "2.0.3"
},
"type": "ssvc"
},
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-798",
"description": "CWE-798 Use of Hard-coded Credentials",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-15T20:42:34.038Z",
"orgId": "26969f82-7e87-44d8-9cb5-f6fb926ddd43",
"shortName": "AHA"
},
"references": [
{
"tags": [
"technical-description"
],
"url": "https://github.com/xn0tsa/your-secrets-are-safe-with-me"
},
{
"tags": [
"third-party-advisory"
],
"url": "https://takeonme.org/gcves/GCVE-1337-2026-00000000000000000000000000000000000000000000000001110111111110111111111111000000000000000000000000000000000000000000000000000001101/"
},
{
"tags": [
"media-coverage"
],
"url": "https://www.theverge.com/tech/1010727/eiliko-robot-hack-energize-lab"
}
],
"source": {
"discovery": "EXTERNAL"
},
"title": "EnergizeLab AI Station Default Root Credentials with SSH Enabled",
"x_gcve": [
{
"recordType": "advisory",
"vulnId": "gcve-1337-2026-00000000000000000000000000000000000000000000000001110111111110111111111111000000000000000000000000000000000000000000000000000001101"
}
],
"x_generator": {
"engine": "Vulnogram 1.0.2"
}
}
},
"cveMetadata": {
"assignerOrgId": "26969f82-7e87-44d8-9cb5-f6fb926ddd43",
"assignerShortName": "AHA",
"cveId": "CVE-2026-105033",
"datePublished": "2026-10-15T20:42:34.038Z",
"dateReserved": "2026-10-02T21:30:55.242Z",
"dateUpdated": "2026-10-15T20:42:34.038Z",
"serial": 1,
"state": "PUBLISHED",
"vulnId": "GCVE-1337-2026-00000000000000000000000000000000000000000000000001110111111110111111111111000000000000000000000000000000000000000000000000000001101"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-133117 (GCVE-0-2026-133117)
Vulnerability from cvelistv5 – Published: 2026-11-19 12:29 – Updated: 2026-11-19 16:13 X_Open Source- CWE-798 - Use of Hard-coded Credentials
| URL | Tags |
|---|---|
| https://wordpress.org/plugins/webtoffee-product-f… | patchrelease-notes |
| https://www.vulncheck.com/advisories/webtoffee-pr… | third-party-advisory |
| Vendor | Product | Version | |
|---|---|---|---|
| webtoffee | WebToffee WooCommerce Product Feeds – Google Shopping, Pinterest, TikTok Ads, & More |
Affected:
0 , < 2.4.4
(semver)
|
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-133117",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-19T16:13:04.321309Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-11-19T16:13:23.401Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "WebToffee WooCommerce Product Feeds \u2013 Google Shopping, Pinterest, TikTok Ads, \u0026 More",
"vendor": "webtoffee",
"versions": [
{
"lessThan": "2.4.4",
"status": "affected",
"version": "0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "buiih"
}
],
"datePublic": "2026-11-19T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "WebToffee Product Feed before 2.4.4 for WordPress contains a use of hard-coded cryptographic key vulnerability that allows unauthenticated attackers to bypass the URL-cron signature check by computing a valid hash using the publicly known constant salt embedded in the plugin source. Attackers can send forged GET requests with attacker-controlled parameters to the unauthenticated init-hooked endpoint to repeatedly trigger product-feed generation, causing CPU/database resource exhaustion and overwriting of the generated feed file."
}
],
"metrics": [
{
"cvssV4_0": {
"Automatable": "NOT_DEFINED",
"Recovery": "NOT_DEFINED",
"Safety": "NOT_DEFINED",
"attackComplexity": "LOW",
"attackRequirements": "NONE",
"attackVector": "NETWORK",
"baseScore": 8.8,
"baseSeverity": "HIGH",
"exploitMaturity": "NOT_DEFINED",
"privilegesRequired": "NONE",
"providerUrgency": "NOT_DEFINED",
"subAvailabilityImpact": "NONE",
"subConfidentialityImpact": "NONE",
"subIntegrityImpact": "NONE",
"userInteraction": "NONE",
"valueDensity": "NOT_DEFINED",
"vectorString": "CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:L/VA:H/SC:N/SI:N/SA:N",
"version": "4.0",
"vulnAvailabilityImpact": "HIGH",
"vulnConfidentialityImpact": "NONE",
"vulnIntegrityImpact": "LOW",
"vulnerabilityResponseEffort": "NOT_DEFINED"
},
"format": "CVSS",
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
},
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "HIGH",
"baseScore": 8.2,
"baseSeverity": "HIGH",
"confidentialityImpact": "NONE",
"integrityImpact": "LOW",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:H",
"version": "3.1"
},
"format": "CVSS",
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-798",
"description": "Use of Hard-coded Credentials",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-11-19T12:29:32.682Z",
"orgId": "83251b91-4cc7-4094-a5c7-464a1b83ea10",
"shortName": "VulnCheck"
},
"references": [
{
"name": "Vendor Patch",
"tags": [
"patch",
"release-notes"
],
"url": "https://wordpress.org/plugins/webtoffee-product-feed/#developers"
},
{
"name": "VulnCheck Advisory: WebToffee Product Feed before 2.4.4 Authorization Bypass via Hard-coded Cron Salt",
"tags": [
"third-party-advisory"
],
"url": "https://www.vulncheck.com/advisories/webtoffee-product-feed-before-authorization-bypass-via-hard-coded-cron-salt"
}
],
"tags": [
"x_open-source"
],
"title": "WebToffee Product Feed before 2.4.4 Authorization Bypass via Hard-coded Cron Salt",
"x_generator": {
"engine": "vulncheck"
}
}
},
"cveMetadata": {
"assignerOrgId": "83251b91-4cc7-4094-a5c7-464a1b83ea10",
"assignerShortName": "VulnCheck",
"cveId": "CVE-2026-133117",
"datePublished": "2026-11-19T12:29:32.682Z",
"dateReserved": "2026-11-19T12:26:46.673Z",
"dateUpdated": "2026-11-19T16:13:23.401Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-132209 (GCVE-0-2026-132209)
Vulnerability from cvelistv5 – Published: 2026-11-18 16:06 – Updated: 2026-11-18 18:24- CWE-798 - - Use of Hard-coded Credentials
| URL | Tags |
|---|---|
| https://www.incibe.es/en/incibe-cert/notices/avis… | patch |
| Vendor | Product | Version | |
|---|---|---|---|
| winCRM | winSAT.exe |
Affected:
0 , < 11/12/2025
(custom)
cpe:2.3:a:wincrm:wincrm.exe:*:*:*:*:*:*:*:* |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-132209",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-18T18:06:49.866907Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-11-18T18:24:15.743Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "winSAT.exe",
"vendor": "winCRM",
"versions": [
{
"lessThan": "11/12/2025",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:a:wincrm:wincrm.exe:*:*:*:*:*:*:*:*",
"versionEndExcluding": "11_12_2025",
"versionStartIncluding": "0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "OR"
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Alejandro Amor\u00edn Ni\u00f1o"
},
{
"lang": "en",
"type": "finder",
"value": "Cosme V\u00e1zquez Tom\u00e9"
}
],
"datePublic": "2026-11-18T16:01:00.000Z",
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "Hardcoded credentials in the executable file. These can be extracted using the \u201cStrings.exe\u201d tool and could allow an attacker unauthorized access to the database and SMTP server.\u0026nbsp;\nwinSAT.exe"
}
],
"value": "Hardcoded credentials in the executable file. These can be extracted using the \u201cStrings.exe\u201d tool and could allow an attacker unauthorized access to the database and SMTP server.\u00a0\nwinSAT.exe"
}
],
"metrics": [
{
"cvssV4_0": {
"Automatable": "NOT_DEFINED",
"Recovery": "NOT_DEFINED",
"Safety": "NOT_DEFINED",
"attackComplexity": "LOW",
"attackRequirements": "NONE",
"attackVector": "NETWORK",
"baseScore": 9.3,
"baseSeverity": "CRITICAL",
"exploitMaturity": "NOT_DEFINED",
"privilegesRequired": "NONE",
"providerUrgency": "NOT_DEFINED",
"subAvailabilityImpact": "NONE",
"subConfidentialityImpact": "NONE",
"subIntegrityImpact": "NONE",
"userInteraction": "NONE",
"valueDensity": "NOT_DEFINED",
"vectorString": "CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:N/SC:N/SI:N/SA:N",
"version": "4.0",
"vulnAvailabilityImpact": "NONE",
"vulnConfidentialityImpact": "HIGH",
"vulnIntegrityImpact": "HIGH",
"vulnerabilityResponseEffort": "NOT_DEFINED"
},
"format": "CVSS",
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-798",
"description": "CWE-798 - Use of Hard-coded Credentials",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-11-18T16:06:15.838Z",
"orgId": "0cbda920-cd7f-484a-8e76-bf7f4b7f4516",
"shortName": "INCIBE"
},
"references": [
{
"tags": [
"patch"
],
"url": "https://www.incibe.es/en/incibe-cert/notices/aviso/multiple-vulnerabilities-wincrm"
}
],
"solutions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "The vulnerabilities have been addressed by the winCRM team in both the online version and the Windows version in the latest available release.\n\u003cbr\u003e\n\u003cbr\u003eOn December 11, 2025, the previous version of winCRM Online was fully replaced by the new, completely rewritten version, which features improved security technology and architecture."
}
],
"value": "The vulnerabilities have been addressed by the winCRM team in both the online version and the Windows version in the latest available release.\n\n\n\nOn December 11, 2025, the previous version of winCRM Online was fully replaced by the new, completely rewritten version, which features improved security technology and architecture."
}
],
"source": {
"discovery": "EXTERNAL"
},
"title": "Vulnerability in winCRM",
"x_generator": {
"engine": "Vulnogram 1.0.5"
}
}
},
"cveMetadata": {
"assignerOrgId": "0cbda920-cd7f-484a-8e76-bf7f4b7f4516",
"assignerShortName": "INCIBE",
"cveId": "CVE-2026-132209",
"datePublished": "2026-11-18T16:06:15.838Z",
"dateReserved": "2026-11-18T15:40:55.991Z",
"dateUpdated": "2026-11-18T18:24:15.743Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-132208 (GCVE-0-2026-132208)
Vulnerability from cvelistv5 – Published: 2026-11-18 16:05 – Updated: 2026-11-18 18:24- CWE-798 - - Use of Hard-coded Credentials
| URL | Tags |
|---|---|
| https://www.incibe.es/en/incibe-cert/notices/avis… | patch |
| Vendor | Product | Version | |
|---|---|---|---|
| winCRM | winCRM.exe |
Affected:
0 , < 11/12/2025
(custom)
cpe:2.3:a:wincrm:wincrm.exe:*:*:*:*:*:*:*:* |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-132208",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-18T18:07:04.429554Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-11-18T18:24:30.163Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "winCRM.exe",
"vendor": "winCRM",
"versions": [
{
"lessThan": "11/12/2025",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:a:wincrm:wincrm.exe:*:*:*:*:*:*:*:*",
"versionEndExcluding": "11_12_2025",
"versionStartIncluding": "0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "OR"
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Alejandro Amor\u00edn Ni\u00f1o"
},
{
"lang": "en",
"type": "finder",
"value": "Cosme V\u00e1zquez Tom\u00e9"
}
],
"datePublic": "2026-11-18T16:01:00.000Z",
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "Hardcoded credentials in the executable file. These can be extracted using the \u201cStrings.exe\u201d tool and could allow an attacker unauthorized access to the database and SMTP server.\u0026nbsp;winCRM.exe"
}
],
"value": "Hardcoded credentials in the executable file. These can be extracted using the \u201cStrings.exe\u201d tool and could allow an attacker unauthorized access to the database and SMTP server.\u00a0winCRM.exe"
}
],
"metrics": [
{
"cvssV4_0": {
"Automatable": "NOT_DEFINED",
"Recovery": "NOT_DEFINED",
"Safety": "NOT_DEFINED",
"attackComplexity": "LOW",
"attackRequirements": "NONE",
"attackVector": "NETWORK",
"baseScore": 9.3,
"baseSeverity": "CRITICAL",
"exploitMaturity": "NOT_DEFINED",
"privilegesRequired": "NONE",
"providerUrgency": "NOT_DEFINED",
"subAvailabilityImpact": "NONE",
"subConfidentialityImpact": "NONE",
"subIntegrityImpact": "NONE",
"userInteraction": "NONE",
"valueDensity": "NOT_DEFINED",
"vectorString": "CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:N/SC:N/SI:N/SA:N",
"version": "4.0",
"vulnAvailabilityImpact": "NONE",
"vulnConfidentialityImpact": "HIGH",
"vulnIntegrityImpact": "HIGH",
"vulnerabilityResponseEffort": "NOT_DEFINED"
},
"format": "CVSS",
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-798",
"description": "CWE-798 - Use of Hard-coded Credentials",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-11-18T16:05:40.882Z",
"orgId": "0cbda920-cd7f-484a-8e76-bf7f4b7f4516",
"shortName": "INCIBE"
},
"references": [
{
"tags": [
"patch"
],
"url": "https://www.incibe.es/en/incibe-cert/notices/aviso/multiple-vulnerabilities-wincrm"
}
],
"solutions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "The vulnerabilities have been addressed by the winCRM team in both the online version and the Windows version in the latest available release.\n\u003cbr\u003e\n\u003cbr\u003eOn December 11, 2025, the previous version of winCRM Online was fully replaced by the new, completely rewritten version, which features improved security technology and architecture."
}
],
"value": "The vulnerabilities have been addressed by the winCRM team in both the online version and the Windows version in the latest available release.\n\n\n\nOn December 11, 2025, the previous version of winCRM Online was fully replaced by the new, completely rewritten version, which features improved security technology and architecture."
}
],
"source": {
"discovery": "EXTERNAL"
},
"title": "Vulnerability in winCRM",
"x_generator": {
"engine": "Vulnogram 1.0.5"
}
}
},
"cveMetadata": {
"assignerOrgId": "0cbda920-cd7f-484a-8e76-bf7f4b7f4516",
"assignerShortName": "INCIBE",
"cveId": "CVE-2026-132208",
"datePublished": "2026-11-18T16:05:40.882Z",
"dateReserved": "2026-11-18T15:40:55.991Z",
"dateUpdated": "2026-11-18T18:24:30.163Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-131811 (GCVE-0-2026-131811)
Vulnerability from cvelistv5 – Published: 2026-11-19 16:08 – Updated: 2026-11-19 16:47- CWE-798 - Use of Hard-coded Credentials
| URL | Tags |
|---|---|
| https://www.zerodayinitiative.com/advisories/ZDI-… | x_research-advisory |
| Vendor | Product | Version | |
|---|---|---|---|
| United Chargers | Grizzl-E Smart 40A |
Affected:
GWM-07.027-03
|
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-131811",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-19T16:33:49.875124Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-11-19T16:47:31.879Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unknown",
"product": "Grizzl-E Smart 40A",
"vendor": "United Chargers",
"versions": [
{
"status": "affected",
"version": "GWM-07.027-03"
}
]
}
],
"dateAssigned": "2026-11-17T22:55:59.356Z",
"datePublic": "2026-11-18T20:02:58.149Z",
"descriptions": [
{
"lang": "en",
"value": "United Chargers Grizzl-E Smart 40A OCPP Backend Configuration Hard-Coded Credentials Authentication Bypass Vulnerability. This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of United Chargers Grizzl-E Smart 40A EV chargers. Authentication is not required to exploit this vulnerability.\n\nThe specific flaw exists within the configuration of the OCPP backend settings interface. The issue results from the use of hard-coded credentials. An attacker can leverage this vulnerability in conjunction with other vulnerabilities to execute arbitrary code in the context of the device. Was ZDI-CAN-29056."
}
],
"metrics": [
{
"cvssV3_0": {
"baseScore": 7.6,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.0/AV:A/AC:L/PR:N/UI:N/S:U/C:L/I:H/A:L",
"version": "3.0"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-798",
"description": "CWE-798: Use of Hard-coded Credentials",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-11-19T16:08:13.101Z",
"orgId": "99f1926a-a320-47d8-bbb5-42feb611262e",
"shortName": "zdi"
},
"references": [
{
"name": "ZDI-26-1032",
"tags": [
"x_research-advisory"
],
"url": "https://www.zerodayinitiative.com/advisories/ZDI-26-1032/"
}
],
"source": {
"lang": "en",
"value": "Taejin Kim(@_tae3_), Junsu Yeo(@junactually), Sunmin Park(@sunminpark4503), Sungmin Son(@_ssm98), Hoseok Lee of SKShieldus(@EQSTLab)"
},
"title": "United Chargers Grizzl-E Smart 40A OCPP Backend Configuration Hard-Coded Credentials Authentication Bypass Vulnerability"
}
},
"cveMetadata": {
"assignerOrgId": "99f1926a-a320-47d8-bbb5-42feb611262e",
"assignerShortName": "zdi",
"cveId": "CVE-2026-131811",
"datePublished": "2026-11-19T16:08:13.101Z",
"dateReserved": "2026-11-17T22:55:59.322Z",
"dateUpdated": "2026-11-19T16:47:31.879Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-131190 (GCVE-0-2026-131190)
Vulnerability from cvelistv5 – Published: 2026-11-19 19:55 – Updated: 2026-11-20 16:57- CWE-798 - The software contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data.
| Vendor | Product | Version | |
|---|---|---|---|
| Splunk | Splunk Enterprise |
Affected:
10.4 , < 10.4.5
(custom)
Affected: 10.2 , < 10.2.9 (custom) Affected: 10.0 , < 10.0.12 (custom) Affected: 9.4 , < 9.4.17 (custom) |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-131190",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-20T16:56:50.550427Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-11-20T16:57:02.060Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"modules": [
"REST API"
],
"product": "Splunk Enterprise",
"vendor": "Splunk",
"versions": [
{
"lessThan": "10.4.5",
"status": "affected",
"version": "10.4",
"versionType": "custom"
},
{
"lessThan": "10.2.9",
"status": "affected",
"version": "10.2",
"versionType": "custom"
},
{
"lessThan": "10.0.12",
"status": "affected",
"version": "10.0",
"versionType": "custom"
},
{
"lessThan": "9.4.17",
"status": "affected",
"version": "9.4",
"versionType": "custom"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Jason Storm, Splunk; Gabriel Nitu, Splunk"
}
],
"datePublic": "2026-11-18T00:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "In Splunk Enterprise versions below 10.4.5, 10.2.9, 10.0.12, and 9.4.17, an unauthenticated user could access RapidDiag process metadata and log file inventory information through the Representational State Transfer (REST) API.\nThe vulnerability is possible because certain RapidDiag REST API endpoints accept a factory-default shared key for node authentication, which lets requests bypass Splunk user authentication.\nFor more information see Using RapidDiag (https://help.splunk.com/en/splunk-enterprise/administer/troubleshoot/9.0/contact-splunk-support/using-rapiddiag) and Secure Splunk Enterprise services with pass4SymmKey (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.0/secure-distributed-and-clustered-splunk-environments/secure-splunk-enterprise-services-with-pass4symmkey) in the Splunk documentation."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 7.5,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N",
"version": "3.1"
},
"format": "CVSS",
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-798",
"description": "The software contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data.",
"lang": "en",
"type": "cwe"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-11-19T19:55:37.894Z",
"orgId": "d1c1063e-7a18-46af-9102-31f8928bc633",
"shortName": "cisco"
},
"references": [
{
"url": "https://advisory.splunk.com/advisories/SVD-2026-1103"
}
],
"solutions": [
{
"lang": "en",
"value": "Upgrade Splunk Enterprise versions 10.6.1, 10.4.5, 10.2.9, 10.0.12, and 9.4.17 or higher."
}
],
"source": {
"advisory": "SVD-2026-1103",
"discovery": "INTERNAL"
},
"title": "Authentication Bypass through the RapidDiag REST API in Splunk Enterprise",
"workarounds": [
{
"lang": "en",
"value": "Turn off or remove the RapidDiag app.\nFor more information see [Manage app and add-on objects](https://help.splunk.com/en/splunk-enterprise/administer/admin-manual/10.2/meet-splunk-apps/manage-app-and-add-on-objects) in the Splunk documentation."
}
]
}
},
"cveMetadata": {
"assignerOrgId": "d1c1063e-7a18-46af-9102-31f8928bc633",
"assignerShortName": "cisco",
"cveId": "CVE-2026-131190",
"datePublished": "2026-11-19T19:55:37.894Z",
"dateReserved": "2026-11-17T20:26:14.301Z",
"dateUpdated": "2026-11-20T16:57:02.060Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-129445 (GCVE-0-2026-129445)
Vulnerability from cvelistv5 – Published: 2026-11-15 10:00 – Updated: 2026-11-18 13:58| URL | Tags |
|---|---|
| https://vuldb.com/vuln/437458 | vdb-entry |
| https://vuldb.com/vuln/437458/cti | signaturepermissions-required |
| https://vuldb.com/cve/CVE-2026-129445 | third-party-advisory |
| https://vuldb.com/submit/1044944 | third-party-advisory |
| https://github.com/XueDugu/dlink-dir850l-consolep… | exploit |
| https://www.dlink.com/ | product |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-129445",
"options": [
{
"Exploitation": "poc"
},
{
"Automatable": "no"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-18T13:58:31.536963Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-11-18T13:58:49.004Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"cpes": [
"cpe:2.3:h:d-link:dir-850l:*:*:*:*:*:*:*:*"
],
"modules": [
"Console Login"
],
"product": "DIR-850L",
"vendor": "D-Link",
"versions": [
{
"status": "affected",
"version": "FW1.20WWb03"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "reporter",
"value": "BenSmith (VulDB User)"
}
],
"descriptions": [
{
"lang": "en",
"value": "A security flaw has been discovered in D-Link DIR-850L FW1.20WWb03. This impacts an unknown function of the file /usr/sbin/consolepwd of the component Console Login. Performing a manipulation results in hard-coded credentials. The attack requires a local approach. The exploit has been released to the public and may be used for attacks."
}
],
"metrics": [
{
"cvssV4_0": {
"baseScore": 9.3,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:4.0/AV:L/AC:L/AT:N/PR:H/UI:N/VC:H/VI:H/VA:H/SC:H/SI:H/SA:H/E:P",
"version": "4.0"
}
},
{
"cvssV3_1": {
"baseScore": 8.2,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H/E:P/RL:X/RC:C",
"version": "3.1"
}
},
{
"cvssV3_0": {
"baseScore": 8.2,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.0/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H/E:P/RL:X/RC:C",
"version": "3.0"
}
},
{
"cvssV2_0": {
"baseScore": 6.5,
"vectorString": "AV:L/AC:L/Au:M/C:C/I:C/A:C/E:POC/RL:ND/RC:C",
"version": "2.0"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-798",
"description": "Hard-coded Credentials",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"cweId": "CWE-259",
"description": "Use of Hard-coded Password",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-11-15T10:00:30.670Z",
"orgId": "1af790b2-7ee1-4545-860a-a788eba489b5",
"shortName": "VulDB"
},
"references": [
{
"name": "VDB-437458 | D-Link DIR-850L Console Login consolepwd hard-coded credentials",
"tags": [
"vdb-entry"
],
"url": "https://vuldb.com/vuln/437458"
},
{
"name": "VDB-437458 | CTI Indicators (IOB, IOC, TTP, IOA)",
"tags": [
"signature",
"permissions-required"
],
"url": "https://vuldb.com/vuln/437458/cti"
},
{
"name": "CVE-2026-129445 | CVE Analysis and Report",
"tags": [
"third-party-advisory"
],
"url": "https://vuldb.com/cve/CVE-2026-129445"
},
{
"name": "Submit #1044944 | D-Link DIR-850L Rev.A Wi-Fi router FW1.20WWb03 Hard-coded Credentials",
"tags": [
"third-party-advisory"
],
"url": "https://vuldb.com/submit/1044944"
},
{
"tags": [
"exploit"
],
"url": "https://github.com/XueDugu/dlink-dir850l-consolepwd-evidence"
},
{
"tags": [
"product"
],
"url": "https://www.dlink.com/"
}
],
"timeline": [
{
"lang": "en",
"time": "2026-11-14T00:00:00.000Z",
"value": "Advisory disclosed"
},
{
"lang": "en",
"time": "2026-11-14T01:00:00.000Z",
"value": "VulDB entry created"
},
{
"lang": "en",
"time": "2026-11-14T18:03:38.000Z",
"value": "VulDB entry last update"
}
],
"title": "D-Link DIR-850L Console Login consolepwd hard-coded credentials",
"x_generator": [
"VulDB PVTS v202611"
]
}
},
"cveMetadata": {
"assignerOrgId": "1af790b2-7ee1-4545-860a-a788eba489b5",
"assignerShortName": "VulDB",
"cveId": "CVE-2026-129445",
"datePublished": "2026-11-15T10:00:30.670Z",
"dateReserved": "2026-11-14T16:58:31.731Z",
"dateUpdated": "2026-11-18T13:58:49.004Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-129444 (GCVE-0-2026-129444)
Vulnerability from cvelistv5 – Published: 2026-11-15 08:15 – Updated: 2026-11-16 18:13| URL | Tags |
|---|---|
| https://vuldb.com/vuln/437457 | vdb-entry |
| https://vuldb.com/vuln/437457/cti | signaturepermissions-required |
| https://vuldb.com/cve/CVE-2026-129444 | third-party-advisory |
| https://vuldb.com/submit/1044943 | third-party-advisory |
| https://github.com/XueDugu/dlink-dsl6740c-ftp-def… | exploit |
| https://www.dlink.com/ | product |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-129444",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-16T14:39:25.562078Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-11-16T18:13:41.892Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"cpes": [
"cpe:2.3:h:d-link:dsl-6740c:*:*:*:*:*:*:*:*"
],
"modules": [
"FTP Daemon"
],
"product": "DSL-6740C",
"vendor": "D-Link",
"versions": [
{
"status": "affected",
"version": "20131126"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "reporter",
"value": "BenSmith (VulDB User)"
}
],
"descriptions": [
{
"lang": "en",
"value": "A vulnerability was identified in D-Link DSL-6740C 20131126. This affects an unknown function of the file /etc/templates/ftpd/ftpd_conf.php of the component FTP Daemon. Such manipulation leads to hard-coded credentials. The attack can be executed remotely. The exploit is publicly available and might be used."
}
],
"metrics": [
{
"cvssV4_0": {
"baseScore": 10,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:H/SC:H/SI:H/SA:H/E:P",
"version": "4.0"
}
},
{
"cvssV3_1": {
"baseScore": 10,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H/E:P/RL:X/RC:C",
"version": "3.1"
}
},
{
"cvssV3_0": {
"baseScore": 10,
"baseSeverity": "CRITICAL",
"vectorString": "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H/E:P/RL:X/RC:C",
"version": "3.0"
}
},
{
"cvssV2_0": {
"baseScore": 10,
"vectorString": "AV:N/AC:L/Au:N/C:C/I:C/A:C/E:POC/RL:ND/RC:C",
"version": "2.0"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-798",
"description": "Hard-coded Credentials",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"cweId": "CWE-259",
"description": "Use of Hard-coded Password",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-11-15T08:15:18.180Z",
"orgId": "1af790b2-7ee1-4545-860a-a788eba489b5",
"shortName": "VulDB"
},
"references": [
{
"name": "VDB-437457 | D-Link DSL-6740C FTP Daemon ftpd_conf.php hard-coded credentials",
"tags": [
"vdb-entry"
],
"url": "https://vuldb.com/vuln/437457"
},
{
"name": "VDB-437457 | CTI Indicators (IOB, IOC, TTP, IOA)",
"tags": [
"signature",
"permissions-required"
],
"url": "https://vuldb.com/vuln/437457/cti"
},
{
"name": "CVE-2026-129444 | CVE Analysis and Report",
"tags": [
"third-party-advisory"
],
"url": "https://vuldb.com/cve/CVE-2026-129444"
},
{
"name": "Submit #1044943 | D-Link DSL-6740C ADSL2+ router (Rev.A) S5 and N5, TR069 builds dated 20131126 Hard-coded Credentials",
"tags": [
"third-party-advisory"
],
"url": "https://vuldb.com/submit/1044943"
},
{
"tags": [
"exploit"
],
"url": "https://github.com/XueDugu/dlink-dsl6740c-ftp-default-evidence"
},
{
"tags": [
"product"
],
"url": "https://www.dlink.com/"
}
],
"timeline": [
{
"lang": "en",
"time": "2026-11-14T00:00:00.000Z",
"value": "Advisory disclosed"
},
{
"lang": "en",
"time": "2026-11-14T01:00:00.000Z",
"value": "VulDB entry created"
},
{
"lang": "en",
"time": "2026-11-14T18:03:34.000Z",
"value": "VulDB entry last update"
}
],
"title": "D-Link DSL-6740C FTP Daemon ftpd_conf.php hard-coded credentials",
"x_generator": [
"VulDB PVTS v202611"
]
}
},
"cveMetadata": {
"assignerOrgId": "1af790b2-7ee1-4545-860a-a788eba489b5",
"assignerShortName": "VulDB",
"cveId": "CVE-2026-129444",
"datePublished": "2026-11-15T08:15:18.180Z",
"dateReserved": "2026-11-14T16:58:27.970Z",
"dateUpdated": "2026-11-16T18:13:41.892Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-129359 (GCVE-0-2026-129359)
Vulnerability from cvelistv5 – Published: 2026-11-15 03:00 – Updated: 2026-11-18 13:58 X_Open Source| URL | Tags |
|---|---|
| https://vuldb.com/vuln/437422 | vdb-entry |
| https://vuldb.com/vuln/437422/cti | signaturepermissions-required |
| https://vuldb.com/cve/CVE-2026-129359 | third-party-advisory |
| https://vuldb.com/submit/1044005 | third-party-advisory |
| https://www.linuxfoundation.org/ | product |
| Vendor | Product | Version | |
|---|---|---|---|
| Linux Foundation | Magma |
Affected:
1.0
Affected: 1.1 Affected: 1.2 Affected: 1.3 Affected: 1.4 Affected: 1.5 Affected: 1.6 Affected: 1.7 Affected: 1.8 Affected: 1.9.0 cpe:2.3:o:linux_foundation:magma:*:*:*:*:*:*:*:* |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-129359",
"options": [
{
"Exploitation": "poc"
},
{
"Automatable": "yes"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-18T13:57:45.486638Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-11-18T13:58:17.008Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"cpes": [
"cpe:2.3:o:linux_foundation:magma:*:*:*:*:*:*:*:*"
],
"product": "Magma",
"vendor": "Linux Foundation",
"versions": [
{
"status": "affected",
"version": "1.0"
},
{
"status": "affected",
"version": "1.1"
},
{
"status": "affected",
"version": "1.2"
},
{
"status": "affected",
"version": "1.3"
},
{
"status": "affected",
"version": "1.4"
},
{
"status": "affected",
"version": "1.5"
},
{
"status": "affected",
"version": "1.6"
},
{
"status": "affected",
"version": "1.7"
},
{
"status": "affected",
"version": "1.8"
},
{
"status": "affected",
"version": "1.9.0"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Aymen Benlamari"
},
{
"lang": "en",
"type": "reporter",
"value": "aymencdm (VulDB User)"
},
{
"lang": "en",
"type": "analyst",
"value": "aymencdm (VulDB User)"
},
{
"lang": "en",
"type": "coordinator",
"value": "VulDB CNA Team"
}
],
"descriptions": [
{
"lang": "en",
"value": "A security flaw has been discovered in Linux Foundation Magma up to 1.9.0. The affected element is an unknown function of the file orc8r/lib/go/registry/interceptors.go. Performing a manipulation results in hard-coded credentials. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way."
}
],
"metrics": [
{
"cvssV4_0": {
"baseScore": 6.9,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:L/VI:L/VA:L/SC:N/SI:N/SA:N/E:P",
"version": "4.0"
}
},
{
"cvssV3_1": {
"baseScore": 7.3,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L/E:P/RL:X/RC:C",
"version": "3.1"
}
},
{
"cvssV3_0": {
"baseScore": 7.3,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L/E:P/RL:X/RC:C",
"version": "3.0"
}
},
{
"cvssV2_0": {
"baseScore": 7.5,
"vectorString": "AV:N/AC:L/Au:N/C:P/I:P/A:P/E:POC/RL:ND/RC:C",
"version": "2.0"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-798",
"description": "Hard-coded Credentials",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"cweId": "CWE-259",
"description": "Use of Hard-coded Password",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-11-15T13:19:56.994Z",
"orgId": "1af790b2-7ee1-4545-860a-a788eba489b5",
"shortName": "VulDB"
},
"references": [
{
"name": "VDB-437422 | Linux Foundation Magma interceptors.go hard-coded credentials",
"tags": [
"vdb-entry"
],
"url": "https://vuldb.com/vuln/437422"
},
{
"name": "VDB-437422 | CTI Indicators (IOB, IOC, TTP, IOA)",
"tags": [
"signature",
"permissions-required"
],
"url": "https://vuldb.com/vuln/437422/cti"
},
{
"name": "CVE-2026-129359 | CVE Analysis and Report",
"tags": [
"third-party-advisory"
],
"url": "https://vuldb.com/cve/CVE-2026-129359"
},
{
"name": "Submit #1044005 | Magma Magma 1.8.0-era master @ 76d9dc0ebc (tested); every deployment Hard-coded Credentials",
"tags": [
"third-party-advisory"
],
"url": "https://vuldb.com/submit/1044005"
},
{
"tags": [
"product"
],
"url": "https://www.linuxfoundation.org/"
}
],
"tags": [
"x_open-source"
],
"timeline": [
{
"lang": "en",
"time": "2026-11-14T00:00:00.000Z",
"value": "Advisory disclosed"
},
{
"lang": "en",
"time": "2026-11-14T01:00:00.000Z",
"value": "VulDB entry created"
},
{
"lang": "en",
"time": "2026-11-15T14:21:51.000Z",
"value": "VulDB entry last update"
}
],
"title": "Linux Foundation Magma interceptors.go hard-coded credentials",
"x_generator": [
"VulDB PVTS v202611"
]
}
},
"cveMetadata": {
"assignerOrgId": "1af790b2-7ee1-4545-860a-a788eba489b5",
"assignerShortName": "VulDB",
"cveId": "CVE-2026-129359",
"datePublished": "2026-11-15T03:00:23.941Z",
"dateReserved": "2026-11-14T06:50:34.752Z",
"dateUpdated": "2026-11-18T13:58:17.008Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
Mitigation
- For outbound authentication: store passwords, keys, and other credentials outside of the code in a strongly-protected, encrypted configuration file or database that is protected from access by all outsiders, including other local users on the same system. Properly protect the key (CWE-320). If you cannot use encryption to protect the file, then make sure that the permissions are as restrictive as possible [REF-7].
- In Windows environments, the Encrypted File System (EFS) may provide some protection.
Mitigation
For inbound authentication: Rather than hard-code a default username and password, key, or other authentication credentials for first time logins, utilize a "first login" mode that requires the user to enter a unique strong password or key.
Mitigation
If the product must contain hard-coded credentials or they cannot be removed, perform access control checks and limit which entities can access the feature that requires the hard-coded credentials. For example, a feature might only be enabled through the system console instead of through a network connection.
Mitigation
- For inbound authentication using passwords: apply strong one-way hashes to passwords and store those hashes in a configuration file or database with appropriate access control. That way, theft of the file/database still requires the attacker to try to crack the password. When handling an incoming password during authentication, take the hash of the password and compare it to the saved hash.
- Use randomly assigned salts for each separate hash that is generated. This increases the amount of computation that an attacker needs to conduct a brute-force attack, possibly limiting the effectiveness of the rainbow table method.
Mitigation
- For front-end to back-end connections: Three solutions are possible, although none are complete.
- The first suggestion involves the use of generated passwords or keys that are changed automatically and must be entered at given time intervals by a system administrator. These passwords will be held in memory and only be valid for the time intervals.
- Next, the passwords or keys should be limited at the back end to only performing actions valid for the front end, as opposed to having full access.
- Finally, the messages sent should be tagged and checksummed with time sensitive values so as to prevent replay-style attacks.
CAPEC-191: Read Sensitive Constants Within an Executable
An adversary engages in activities to discover any sensitive constants present within the compiled code of an executable. These constants may include literal ASCII strings within the file itself, or possibly strings hard-coded into particular routines that can be revealed by code refactoring methods including static and dynamic analysis.
CAPEC-70: Try Common or Default Usernames and Passwords
An adversary may try certain common or default usernames and passwords to gain access into the system and perform unauthorized actions. An adversary may try an intelligent brute force using empty passwords, known vendor default credentials, as well as a dictionary of common usernames and passwords. Many vendor products come preconfigured with default (and thus well-known) usernames and passwords that should be deleted prior to usage in a production environment. It is a common mistake to forget to remove these default login credentials. Another problem is that users would pick very simple (common) passwords (e.g. "secret" or "password") that make it easier for the attacker to gain access to the system compared to using a brute force attack or even a dictionary attack using a full dictionary.