CWE-379
Weakness AllowedCreation of Temporary File in Directory with Insecure Permissions
Abstraction: Base · Status: Incomplete
The product creates a temporary file in a directory whose permissions allow unintended actors to determine the file's existence or otherwise access that file.
Mapping guidance
This CWE entry is at the Base level of abstraction, which is a preferred level of abstraction for mapping to the root causes of vulnerabilities.
Carefully read both the name and description to ensure that this mapping is an appropriate fit. Do not try to 'force' a mapping to a lower-level Base/Variant simply to comply with this preferred level of abstraction.
Modes of introduction
Detection methods
Automated Static Analysis
Automated static analysis, commonly referred to as Static Application Security Testing (SAST), can find some instances of this weakness by analyzing source code (or binary/compiled code) without having to execute it. Typically, this is done by building a model of data flow and control flow, then searching for potentially-vulnerable patterns that connect "sources" (origins of input) with "sinks" (destinations where the data interacts with external components, a lower layer such as the OS, etc.)
Effectiveness: High
Content history
updated Time_of_Introduction
updated Common_Consequences, Relationships, Other_Notes, Taxonomy_Mappings
updated Relationships, Taxonomy_Mappings
updated Description, Name
updated Description, Other_Notes, Potential_Mitigations
updated Common_Consequences
updated Relationships, Taxonomy_Mappings
updated References, Relationships
updated Demonstrative_Examples
updated Relationships
updated Applicable_Platforms, Demonstrative_Examples, Taxonomy_Mappings
updated Type
updated Name, References, Relationships, Type
updated Demonstrative_Examples
updated Description
updated Detection_Factors, Relationships, Time_of_Introduction
updated Mapping_Notes
updated Observed_Examples
updated Relationships, Weakness_Ordinalities
updated Observed_Examples
updated Common_Consequences, Description
140 vulnerabilities reference this CWE, most recent first.
CVE-2026-123974 (GCVE-0-2026-123974)
Vulnerability from cvelistv5 – Published: 2026-11-06 19:52 – Updated: 2026-11-06 20:18 Unsupported When Assigned- CWE-379 - Creation of temporary file in directory with insecure permissions
| Vendor | Product | Version | |
|---|---|---|---|
| PyTorch | TorchServe |
Affected:
0 , < *
(semver)
|
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-123974",
"options": [
{
"Exploitation": "poc"
},
{
"Automatable": "no"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-06T20:18:09.099163Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-11-06T20:18:25.863Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unknown",
"product": "TorchServe",
"repo": "https://github.com/pytorch/serve",
"vendor": "PyTorch",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Christ Bowel"
}
],
"datePublic": "2026-10-29T15:00:00.000Z",
"descriptions": [
{
"lang": "en",
"value": "In all versions of PyTorch\u0027s TorchServe, a predictable extraction directory in /tmp lets a local user swap the model handler and run code as the TorchServe service account leading to local privilege escalation."
}
],
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 7.8,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"format": "CVSS",
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-379",
"description": "CWE-379 Creation of temporary file in directory with insecure permissions",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-11-06T19:52:16.058Z",
"orgId": "7fefd608-56a6-419f-a002-fd8543c0710a",
"shortName": "Akrites"
},
"references": [
{
"url": "https://christbowel.com/blog/torchserve-lpe/"
},
{
"url": "https://github.com/Christbowel/torchserve-lpe"
}
],
"solutions": [
{
"lang": "en",
"value": "The project is archived and currently no permanent solution is scheduled for release. See workaround section."
}
],
"tags": [
"unsupported-when-assigned"
],
"title": "pytorch/serve: Local privilege escalation through insecure temporary path",
"workarounds": [
{
"lang": "en",
"value": "Three independent fixes:\n\n\n * Set TEMP (or pass -Djava.io.tmpdir) to a directory the service account owns and that is not world-writable.\n * Harden the systemd unit with PrivateTmp=yes, so /tmp is namespaced per service.\n * At the code level, extract into a directory owned by the service account and refuse to reuse a pre-existing extraction root that the service does not own, instead of forceMkdir-ing into whatever is already there."
}
],
"x_generator": {
"engine": "cvelib 1.8.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "7fefd608-56a6-419f-a002-fd8543c0710a",
"assignerShortName": "Akrites",
"cveId": "CVE-2026-123974",
"datePublished": "2026-11-06T19:52:16.058Z",
"dateReserved": "2026-11-06T17:53:03.966Z",
"dateUpdated": "2026-11-06T20:18:25.863Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-120778 (GCVE-0-2026-120778)
Vulnerability from cvelistv5 – Published: 2026-11-10 18:23 – Updated: 2026-11-19 22:27- CWE-379 - Creation of Temporary File in Directory with Insecure Permissions
| URL | Tags |
|---|---|
| https://msrc.microsoft.com/update-guide/vulnerabi… | vendor-advisorypatch |
| Vendor | Product | Version | |
|---|---|---|---|
| Microsoft | Aspire.Cli |
Affected:
13.5.4 , < 13.6.5
(custom)
cpe:2.3:a:microsoft:aspire.cli:*:*:*:*:*:*:*:* |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-120778",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-10T18:45:05.454905Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-11-10T18:47:21.714Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"platforms": [
"Linux",
"Mac OS"
],
"product": "Aspire.Cli",
"vendor": "Microsoft",
"versions": [
{
"lessThan": "13.6.5",
"status": "affected",
"version": "13.5.4",
"versionType": "custom"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:a:microsoft:aspire.cli:*:*:*:*:*:*:*:*",
"versionEndExcluding": "13.6.5",
"versionStartIncluding": "13.5.4",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"datePublic": "2026-11-10T16:00:00.000Z",
"descriptions": [
{
"lang": "en-US",
"value": "Creation of temporary file in directory with insecure permissions in .NET Aspire allows an authorized attacker to elevate privileges locally."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 7.3,
"baseSeverity": "HIGH",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:U/C:H/I:H/A:H/E:U/RL:O/RC:C",
"version": "3.1"
},
"format": "CVSS",
"scenarios": [
{
"lang": "en-US",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-379",
"description": "CWE-379: Creation of Temporary File in Directory with Insecure Permissions",
"lang": "en-US",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-11-19T22:27:33.556Z",
"orgId": "f38d906d-7342-40ea-92c1-6c4a2c6478c8",
"shortName": "microsoft"
},
"references": [
{
"name": "Aspire Elevation of Privilege Vulnerability",
"tags": [
"vendor-advisory",
"patch"
],
"url": "https://msrc.microsoft.com/update-guide/vulnerability/CVE-2026-120778"
}
],
"title": "Aspire Elevation of Privilege Vulnerability"
}
},
"cveMetadata": {
"assignerOrgId": "f38d906d-7342-40ea-92c1-6c4a2c6478c8",
"assignerShortName": "microsoft",
"cveId": "CVE-2026-120778",
"datePublished": "2026-11-10T18:23:52.929Z",
"dateReserved": "2026-11-02T22:42:10.892Z",
"dateUpdated": "2026-11-19T22:27:33.556Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-119193 (GCVE-0-2026-119193)
Vulnerability from cvelistv5 – Published: 2026-10-29 19:35 – Updated: 2026-10-30 16:09- CWE-379 - Creation of Temporary File in Directory with Insecure Permissions
| URL | Tags |
|---|---|
| https://github.com/sebastianbergmann/phpunit/secu… | x_refsource_CONFIRM |
| https://github.com/sebastianbergmann/phpunit/comm… | x_refsource_MISC |
| https://github.com/sebastianbergmann/phpunit/rele… | x_refsource_MISC |
| Vendor | Product | Version | |
|---|---|---|---|
| sebastianbergmann | phpunit |
Affected:
>= 13.4.0, < 13.4.4
|
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-119193",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-10-30T15:34:44.219252Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-10-30T16:09:03.726Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"product": "phpunit",
"vendor": "sebastianbergmann",
"versions": [
{
"status": "affected",
"version": "\u003e= 13.4.0, \u003c 13.4.4"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "PHPUnit is a testing framework for PHP. From 13.4.0 until 13.4.4, the TestCase::coverageFilesDirectory() logic in src/Runner/Phpt/TestCase.php creates temporary files for PHPT code coverage in a predictable phpunit-phpt directory under sys_get_temp_dir() and reuses that directory without verifying its ownership or permissions. On multi-user systems with a shared temporary path, a local attacker who creates the directory before the developer runs PHPT tests with code coverage can replace the generated job file before the child process executes it with require, allowing arbitrary code execution with the developer\u0027s privileges while the test and coverage report appear successful. PHPUnit 12.5 and earlier, default macOS and Windows configurations with per-user temporary directories, and single-user environments where another user cannot create files in the temporary path are not affected. This issue is fixed in 13.4.4."
}
],
"metrics": [
{
"cvssV4_0": {
"attackComplexity": "LOW",
"attackRequirements": "PRESENT",
"attackVector": "LOCAL",
"baseScore": 5.4,
"baseSeverity": "MEDIUM",
"privilegesRequired": "LOW",
"subAvailabilityImpact": "NONE",
"subConfidentialityImpact": "NONE",
"subIntegrityImpact": "NONE",
"userInteraction": "PASSIVE",
"vectorString": "CVSS:4.0/AV:L/AC:L/AT:P/PR:L/UI:P/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N",
"version": "4.0",
"vulnAvailabilityImpact": "HIGH",
"vulnConfidentialityImpact": "HIGH",
"vulnIntegrityImpact": "HIGH"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-379",
"description": "CWE-379: Creation of Temporary File in Directory with Insecure Permissions",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-29T19:35:36.052Z",
"orgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
"shortName": "GitHub_M"
},
"references": [
{
"name": "https://github.com/sebastianbergmann/phpunit/security/advisories/GHSA-9vw2-f4vp-x7gf",
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://github.com/sebastianbergmann/phpunit/security/advisories/GHSA-9vw2-f4vp-x7gf"
},
{
"name": "https://github.com/sebastianbergmann/phpunit/commit/ae31c78a86e9d6c641497bacf47462d7bb7d7f34",
"tags": [
"x_refsource_MISC"
],
"url": "https://github.com/sebastianbergmann/phpunit/commit/ae31c78a86e9d6c641497bacf47462d7bb7d7f34"
},
{
"name": "https://github.com/sebastianbergmann/phpunit/releases/tag/13.4.4",
"tags": [
"x_refsource_MISC"
],
"url": "https://github.com/sebastianbergmann/phpunit/releases/tag/13.4.4"
}
],
"source": {
"advisory": "GHSA-9vw2-f4vp-x7gf",
"discovery": "UNKNOWN"
},
"title": "PHPUnit vulnerable to code execution by other local users via shared temporary directory in PHPT code coverage handling"
}
},
"cveMetadata": {
"assignerOrgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
"assignerShortName": "GitHub_M",
"cveId": "CVE-2026-119193",
"datePublished": "2026-10-29T19:35:36.052Z",
"dateReserved": "2026-10-29T16:04:48.728Z",
"dateUpdated": "2026-10-30T16:09:03.726Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-118990 (GCVE-0-2026-118990)
Vulnerability from cvelistv5 – Published: 2026-10-30 13:12 – Updated: 2026-11-06 16:49| URL | Tags |
|---|---|
| https://metacpan.org/release/OETIKER/CallBackery-… | release-notes |
{
"containers": {
"adp": [
{
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "NONE",
"baseScore": 5.5,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "HIGH",
"integrityImpact": "NONE",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N",
"version": "3.1"
}
},
{
"other": {
"content": {
"id": "CVE-2026-118990",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-06T16:48:54.642553Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-11-06T16:49:28.390Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://cpan.org/modules",
"defaultStatus": "unaffected",
"modules": [
"CallBackery"
],
"packageName": "CallBackery",
"packageURL": "pkg:cpan/CallBackery",
"programFiles": [
"lib/CallBackery/Config.pm"
],
"programRoutines": [
{
"name": "CallBackery::Config::getConfigBlob"
}
],
"repo": "https://github.com/oetiker/callbackery",
"versions": [
{
"lessThan": "0.62.0",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "CallBackery versions before 0.62.0 for Perl leave a world-readable dump of the configuration database in /tmp when taking a configuration backup.\n\ngetConfigBlob() has the sqlite3 shell write the dump to /tmp/cbdump\u003cpid\u003e and never removes it. The file takes the process umask, and a symlink planted at that predictable name is followed.\n\nThe dump holds every user\u0027s password hash and every value saved by the application\u0027s forms. A local user can read these after any backup, and may redirect the dump to a file of their choosing."
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-379",
"description": "CWE-379 Creation of Temporary File in Directory with Insecure Permissions",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"cweId": "CWE-59",
"description": "CWE-59 Improper Link Resolution Before File Access",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-30T13:12:29.396Z",
"orgId": "9b29abf9-4ab0-4765-b253-1875cd9b441e",
"shortName": "CPANSec"
},
"references": [
{
"tags": [
"release-notes"
],
"url": "https://metacpan.org/release/OETIKER/CallBackery-0.62.0/changes"
}
],
"solutions": [
{
"lang": "en",
"value": "Upgrade to CallBackery 0.62.0 or later, and delete any leftover /tmp/cbdump* files."
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "CallBackery versions before 0.62.0 for Perl leave a world-readable dump of the configuration database in /tmp when taking a configuration backup",
"x_generator": {
"engine": "cpansec-cna-tool 0.1"
}
}
},
"cveMetadata": {
"assignerOrgId": "9b29abf9-4ab0-4765-b253-1875cd9b441e",
"assignerShortName": "CPANSec",
"cveId": "CVE-2026-118990",
"datePublished": "2026-10-30T13:12:29.396Z",
"dateReserved": "2026-10-29T10:58:47.285Z",
"dateUpdated": "2026-11-06T16:49:28.390Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-114594 (GCVE-0-2026-114594)
Vulnerability from cvelistv5 – Published: 2026-11-09 16:15 – Updated: 2026-11-12 16:44| Vendor | Product | Version | |
|---|---|---|---|
| Sandisk | Sandisk Dashboard |
Affected:
0 , ≤ 5.2.2.3
(custom)
|
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-114594",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-11-12T16:43:46.843251Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-11-12T16:44:31.650Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"platforms": [
"Windows"
],
"product": "Sandisk Dashboard",
"vendor": "Sandisk",
"versions": [
{
"lessThanOrEqual": "5.2.2.3",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Johan Francsics"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "A time-of-check to time-of-use (TOCTOU) race condition in the Sandisk Dashboard installer allows a local, authenticated standard user to replace an installer-staged binary in a user-writable temporary directory between validation and execution. The elevated installer then executes the attacker-controlled binary, resulting in local privilege escalation to a high-integrity (administrative) context.\u0026nbsp;\u003cspan\u003eThis issue affects Sandisk Dashboard through 5.2.2.3.\u003c/span\u003e"
}
],
"value": "A time-of-check to time-of-use (TOCTOU) race condition in the Sandisk Dashboard installer allows a local, authenticated standard user to replace an installer-staged binary in a user-writable temporary directory between validation and execution. The elevated installer then executes the attacker-controlled binary, resulting in local privilege escalation to a high-integrity (administrative) context.\u00a0This issue affects Sandisk Dashboard through 5.2.2.3."
}
],
"metrics": [
{
"cvssV4_0": {
"Automatable": "NOT_DEFINED",
"Recovery": "NOT_DEFINED",
"Safety": "NOT_DEFINED",
"attackComplexity": "LOW",
"attackRequirements": "PRESENT",
"attackVector": "LOCAL",
"baseScore": 5.4,
"baseSeverity": "MEDIUM",
"exploitMaturity": "NOT_DEFINED",
"privilegesRequired": "LOW",
"providerUrgency": "NOT_DEFINED",
"subAvailabilityImpact": "NONE",
"subConfidentialityImpact": "NONE",
"subIntegrityImpact": "NONE",
"userInteraction": "ACTIVE",
"valueDensity": "NOT_DEFINED",
"vectorString": "CVSS:4.0/AV:L/AC:L/AT:P/PR:L/UI:A/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N",
"version": "4.0",
"vulnAvailabilityImpact": "HIGH",
"vulnConfidentialityImpact": "HIGH",
"vulnIntegrityImpact": "HIGH",
"vulnerabilityResponseEffort": "NOT_DEFINED"
},
"format": "CVSS",
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-367",
"description": "CWE-367 Time-of-check time-of-use (TOCTOU) race condition",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"cweId": "CWE-379",
"description": "CWE-379 Creation of temporary file in directory with insecure permissions",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-11-09T16:15:55.511Z",
"orgId": "634960e2-700d-44e8-9cc5-06f1161e61db",
"shortName": "SDC"
},
"references": [
{
"url": "https://www.sandisk.com/support/product-security/sdc-26001-sandisk-dashboard-app-version-5-3-2-4"
}
],
"source": {
"discovery": "EXTERNAL"
},
"title": "Time-of-check time-of-use (TOCTOU) race condition in Sandisk Dashboard Installer",
"x_generator": {
"engine": "Vulnogram 1.0.5"
}
}
},
"cveMetadata": {
"assignerOrgId": "634960e2-700d-44e8-9cc5-06f1161e61db",
"assignerShortName": "SDC",
"cveId": "CVE-2026-114594",
"datePublished": "2026-11-09T16:15:55.511Z",
"dateReserved": "2026-10-21T19:56:10.660Z",
"dateUpdated": "2026-11-12T16:44:31.650Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-102740 (GCVE-0-2026-102740)
Vulnerability from cvelistv5 – Published: 2026-10-15 17:25 – Updated: 2026-10-15 18:27| URL | Tags |
|---|---|
| https://github.com/AsyncHttpClient/async-http-cli… | x_refsource_CONFIRM |
| https://github.com/AsyncHttpClient/async-http-cli… | x_refsource_MISC |
| https://github.com/AsyncHttpClient/async-http-cli… | x_refsource_MISC |
| https://github.com/AsyncHttpClient/async-http-cli… | x_refsource_MISC |
| https://github.com/AsyncHttpClient/async-http-cli… | x_refsource_MISC |
| https://github.com/AsyncHttpClient/async-http-cli… | x_refsource_MISC |
| Vendor | Product | Version | |
|---|---|---|---|
| AsyncHttpClient | async-http-client |
Affected:
>= 2.0.0, < 2.16.1
Affected: >= 3.0.0, < 3.0.12 |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-102740",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "partial"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-10-15T18:26:38.206388Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-10-15T18:27:00.104Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"product": "async-http-client",
"vendor": "AsyncHttpClient",
"versions": [
{
"status": "affected",
"version": "\u003e= 2.0.0, \u003c 2.16.1"
},
{
"status": "affected",
"version": "\u003e= 3.0.0, \u003c 3.0.12"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "The AsyncHttpClient library allows Java applications to execute HTTP requests and asynchronously process HTTP responses. From 2.0.0 until 2.16.1 and 3.0.12, PropertiesBasedResumableProcessor stores resumable download state at the predictable shared path $java.io.tmpdir/ahc/ResumableAsyncHandler.properties with default permissions and link-following file operations. A local user who can read the shared store can see download URLs, including embedded user information or query tokens. A local user who can write within or pre-create the affected shared store directory can plant a symbolic link that the client follows when saving state, truncating and overwriting a target file writable by the client process. The filesystem path is used when ResumableAsyncHandler decorates another AsyncHandler, while the no-argument constructors use a no-op processor and are unaffected. This issue is fixed in versions 2.16.1 and 3.0.12."
}
],
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "HIGH",
"attackVector": "LOCAL",
"availabilityImpact": "LOW",
"baseScore": 5.8,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "LOW",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:L/I:H/A:L",
"version": "3.1"
}
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-61",
"description": "CWE-61: UNIX Symbolic Link (Symlink) Following",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"cweId": "CWE-379",
"description": "CWE-379: Creation of Temporary File in Directory with Insecure Permissions",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"cweId": "CWE-732",
"description": "CWE-732: Incorrect Permission Assignment for Critical Resource",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-10-15T17:25:30.183Z",
"orgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
"shortName": "GitHub_M"
},
"references": [
{
"name": "https://github.com/AsyncHttpClient/async-http-client/security/advisories/GHSA-cf59-3jcr-vfhw",
"tags": [
"x_refsource_CONFIRM"
],
"url": "https://github.com/AsyncHttpClient/async-http-client/security/advisories/GHSA-cf59-3jcr-vfhw"
},
{
"name": "https://github.com/AsyncHttpClient/async-http-client/pull/2281",
"tags": [
"x_refsource_MISC"
],
"url": "https://github.com/AsyncHttpClient/async-http-client/pull/2281"
},
{
"name": "https://github.com/AsyncHttpClient/async-http-client/commit/0422e11c954c4b026e986d1458f7a7a2eab7e591",
"tags": [
"x_refsource_MISC"
],
"url": "https://github.com/AsyncHttpClient/async-http-client/commit/0422e11c954c4b026e986d1458f7a7a2eab7e591"
},
{
"name": "https://github.com/AsyncHttpClient/async-http-client/commit/d945ce3357b093e74526871cd309832a717ecfda",
"tags": [
"x_refsource_MISC"
],
"url": "https://github.com/AsyncHttpClient/async-http-client/commit/d945ce3357b093e74526871cd309832a717ecfda"
},
{
"name": "https://github.com/AsyncHttpClient/async-http-client/releases/tag/async-http-client-project-2.16.1",
"tags": [
"x_refsource_MISC"
],
"url": "https://github.com/AsyncHttpClient/async-http-client/releases/tag/async-http-client-project-2.16.1"
},
{
"name": "https://github.com/AsyncHttpClient/async-http-client/releases/tag/async-http-client-project-3.0.12",
"tags": [
"x_refsource_MISC"
],
"url": "https://github.com/AsyncHttpClient/async-http-client/releases/tag/async-http-client-project-3.0.12"
}
],
"source": {
"advisory": "GHSA-cf59-3jcr-vfhw",
"discovery": "UNKNOWN"
},
"title": "AsyncHttpClient: Resumable download index store is created world-readable and follows a planted symlink"
}
},
"cveMetadata": {
"assignerOrgId": "a0819718-46f1-4df5-94e2-005712e83aaa",
"assignerShortName": "GitHub_M",
"cveId": "CVE-2026-102740",
"datePublished": "2026-10-15T17:25:30.183Z",
"dateReserved": "2026-09-29T16:19:11.295Z",
"dateUpdated": "2026-10-15T18:27:00.104Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-97209 (GCVE-0-2026-97209)
Vulnerability from cvelistv5 – Published: 2026-10-30 08:59 – Updated: 2026-11-19 08:00- CWE-379 - Creation of Temporary File in Directory with Insecure Permissions
| Vendor | Product | Version | |
|---|---|---|---|
| elixir-lang | elixir |
Affected:
1.20.0-rc.4 , < 1.20.5
(semver)
cpe:2.3:a:elixir-lang:elixir:*:*:*:*:*:*:*:* |
|
| elixir-lang | elixir |
Affected:
7f3d95b60c28ae3026a5c1bf943166391245bfd1 , < *
(git)
cpe:2.3:a:elixir-lang:elixir:*:*:*:*:*:*:*:* |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-97209",
"options": [
{
"Exploitation": "poc"
},
{
"Automatable": "no"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-10-30T16:50:17.250968Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-10-30T16:50:46.465Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"references": [
{
"tags": [
"exploit"
],
"url": "https://github.com/elixir-lang/elixir/security/advisories/GHSA-96q6-xhwp-fc8q"
}
],
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"cpes": [
"cpe:2.3:a:elixir-lang:elixir:*:*:*:*:*:*:*:*"
],
"defaultStatus": "unaffected",
"modules": [
"\u0027Elixir.Mix.Tasks.Deps.Partition\u0027"
],
"packageName": "mix",
"packageURL": "pkg:otp/mix?repository_url=https:%2F%2Fgithub.com%2Felixir-lang%2Felixir\u0026vcs_url=git%2Bhttps:%2F%2Fgithub.com%2Felixir-lang%2Felixir.git",
"product": "elixir",
"programFiles": [
"lib/mix/tasks/deps.partition.ex"
],
"programRoutines": [
{
"name": "\u0027Elixir.Mix.Tasks.Deps.Partition\u0027:server/3"
},
{
"name": "\u0027Elixir.Mix.Tasks.Deps.Partition\u0027:server/4"
},
{
"name": "\u0027Elixir.Mix.Tasks.Deps.Partition\u0027:client/0"
}
],
"repo": "https://github.com/elixir-lang/elixir",
"vendor": "elixir-lang",
"versions": [
{
"lessThan": "1.20.5",
"status": "affected",
"version": "1.20.0-rc.4",
"versionType": "semver"
}
]
},
{
"collectionURL": "https://github.com",
"cpes": [
"cpe:2.3:a:elixir-lang:elixir:*:*:*:*:*:*:*:*"
],
"defaultStatus": "unaffected",
"modules": [
"\u0027Elixir.Mix.Tasks.Deps.Partition\u0027"
],
"packageName": "elixir-lang/elixir",
"packageURL": "pkg:github/elixir-lang/elixir",
"product": "elixir",
"programFiles": [
"lib/mix/lib/mix/tasks/deps.partition.ex"
],
"programRoutines": [
{
"name": "\u0027Elixir.Mix.Tasks.Deps.Partition\u0027:server/3"
},
{
"name": "\u0027Elixir.Mix.Tasks.Deps.Partition\u0027:server/4"
},
{
"name": "\u0027Elixir.Mix.Tasks.Deps.Partition\u0027:client/0"
}
],
"repo": "https://github.com/elixir-lang/elixir",
"vendor": "elixir-lang",
"versions": [
{
"changes": [
{
"at": "55eb91220a1de14dc5aa27029d1f45b0f5832b2d",
"status": "unaffected"
},
{
"at": "9adbe955c8664f4be77d879dd38c003dd39fa777",
"status": "unaffected"
}
],
"lessThan": "*",
"status": "affected",
"version": "7f3d95b60c28ae3026a5c1bf943166391245bfd1",
"versionType": "git"
}
]
}
],
"configurations": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eThe attack requires partitioned dependency compilation, which is off by default and enabled by setting \u003ccode\u003eMIX_OS_DEPS_COMPILE_PARTITION_COUNT\u003c/code\u003e to a value greater than one, a \u003ccode\u003emix deps.compile\u003c/code\u003e run that compiles at least two non-local dependencies, and a system temporary directory shared with other local users, which is the default on Linux when \u003ccode\u003eTMPDIR\u003c/code\u003e is unset. Platforms with per-user temporary directories, such as macOS and Windows by default, are not affected unless \u003ccode\u003eTMPDIR\u003c/code\u003e points at a shared location.\u003c/p\u003e"
},
{
"base64": false,
"type": "text/markdown",
"value": "The attack requires partitioned dependency compilation, which is off by default and enabled by setting `MIX_OS_DEPS_COMPILE_PARTITION_COUNT` to a value greater than one, a `mix deps.compile` run that compiles at least two non-local dependencies, and a system temporary directory shared with other local users, which is the default on Linux when `TMPDIR` is unset. Platforms with per-user temporary directories, such as macOS and Windows by default, are not affected unless `TMPDIR` points at a shared location."
}
],
"value": "The attack requires partitioned dependency compilation, which is off by default and enabled by setting MIX_OS_DEPS_COMPILE_PARTITION_COUNT to a value greater than one, a mix deps.compile run that compiles at least two non-local dependencies, and a system temporary directory shared with other local users, which is the default on Linux when TMPDIR is unset. Platforms with per-user temporary directories, such as macOS and Windows by default, are not affected unless TMPDIR points at a shared location."
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:a:elixir-lang:elixir:*:*:*:*:*:*:*:*",
"versionEndExcluding": "1.20.5",
"versionStartIncluding": "1.20.0-rc.4",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "AND"
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "Quinn Wilton"
},
{
"lang": "en",
"type": "reporter",
"value": "Quinn Wilton"
},
{
"lang": "en",
"type": "coordinator",
"value": "Jonatan M\u00e4nnchen / EEF"
},
{
"lang": "en",
"type": "remediation developer",
"value": "Jos\u00e9 Valim"
}
],
"dateAssigned": "2026-10-15T10:43:20.000Z",
"datePublic": "2026-10-30T08:59:17.000Z",
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eInsecure Temporary File vulnerability in Mix \u003ccode\u003edeps.partition\u003c/code\u003e in Elixir allows a local user to execute code as another user via a swapped partition config file. Partitioned dependency compilation passes the project configuration to each partition VM through a file in a fixed-name directory under the shared system temporary directory, and the partition trusts what it reads back. Another local user on the same host can exploit this during a \u003ccode\u003emix deps.compile\u003c/code\u003e run that uses partitioned compilation.\u003c/p\u003e\n\u003cp\u003e\u003ccode\u003eMix.Tasks.Deps.Partition.server/4\u003c/code\u003e in \u003ccode\u003elib/mix/lib/mix/tasks/deps.partition.ex\u003c/code\u003e creates the directory with \u003ccode\u003eFile.mkdir_p/1\u003c/code\u003e, which accepts an existing directory without checking its owner, so a user who created it first can replace the file before \u003ccode\u003eclient/0\u003c/code\u003e reads it.\u003c/p\u003e\n\u003cp\u003eThis issue affects mix: from 1.20.0-rc.4 before 1.20.5.\u003c/p\u003e"
},
{
"base64": false,
"type": "text/markdown",
"value": "Insecure Temporary File vulnerability in Mix `deps.partition` in Elixir allows a local user to execute code as another user via a swapped partition config file. Partitioned dependency compilation passes the project configuration to each partition VM through a file in a fixed-name directory under the shared system temporary directory, and the partition trusts what it reads back. Another local user on the same host can exploit this during a `mix deps.compile` run that uses partitioned compilation.\n\n`Mix.Tasks.Deps.Partition.server/4` in `lib/mix/lib/mix/tasks/deps.partition.ex` creates the directory with `File.mkdir_p/1`, which accepts an existing directory without checking its owner, so a user who created it first can replace the file before `client/0` reads it.\n\nThis issue affects mix: from 1.20.0-rc.4 before 1.20.5."
}
],
"value": "Insecure Temporary File vulnerability in Mix deps.partition in Elixir allows a local user to execute code as another user via a swapped partition config file. Partitioned dependency compilation passes the project configuration to each partition VM through a file in a fixed-name directory under the shared system temporary directory, and the partition trusts what it reads back. Another local user on the same host can exploit this during a mix deps.compile run that uses partitioned compilation.\n\nMix.Tasks.Deps.Partition.server/4 in lib/mix/lib/mix/tasks/deps.partition.ex creates the directory with File.mkdir_p/1, which accepts an existing directory without checking its owner, so a user who created it first can replace the file before client/0 reads it.\n\nThis issue affects mix: from 1.20.0-rc.4 before 1.20.5."
}
],
"impacts": [
{
"capecId": "CAPEC-26",
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eA local user on a shared host who creates the partition directory before the victim\u0027s build replaces the serialized configuration and runs arbitrary shell commands as the developer or CI user whose \u003ccode\u003emix deps.compile\u003c/code\u003e uses partitioned compilation.\u003c/p\u003e"
},
{
"base64": false,
"type": "text/markdown",
"value": "A local user on a shared host who creates the partition directory before the victim\u0027s build replaces the serialized configuration and runs arbitrary shell commands as the developer or CI user whose `mix deps.compile` uses partitioned compilation."
}
],
"value": "A local user on a shared host who creates the partition directory before the victim\u0027s build replaces the serialized configuration and runs arbitrary shell commands as the developer or CI user whose mix deps.compile uses partitioned compilation."
}
]
},
{
"capecId": "CAPEC-155",
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eEven without pre-creating the directory, the world-readable partition file discloses the project configuration, including \u003ccode\u003eMix.install\u003c/code\u003e compile-time config, to other local users while the build runs.\u003c/p\u003e"
},
{
"base64": false,
"type": "text/markdown",
"value": "Even without pre-creating the directory, the world-readable partition file discloses the project configuration, including `Mix.install` compile-time config, to other local users while the build runs."
}
],
"value": "Even without pre-creating the directory, the world-readable partition file discloses the project configuration, including Mix.install compile-time config, to other local users while the build runs."
}
]
}
],
"metrics": [
{
"cvssV4_0": {
"Automatable": "NOT_DEFINED",
"Recovery": "NOT_DEFINED",
"Safety": "NOT_DEFINED",
"attackComplexity": "LOW",
"attackRequirements": "PRESENT",
"attackVector": "LOCAL",
"baseScore": 5.4,
"baseSeverity": "MEDIUM",
"privilegesRequired": "LOW",
"providerUrgency": "NOT_DEFINED",
"subAvailabilityImpact": "NONE",
"subConfidentialityImpact": "NONE",
"subIntegrityImpact": "NONE",
"userInteraction": "PASSIVE",
"valueDensity": "NOT_DEFINED",
"vectorString": "CVSS:4.0/AV:L/AC:L/AT:P/PR:L/UI:P/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N",
"version": "4.0",
"vulnAvailabilityImpact": "HIGH",
"vulnConfidentialityImpact": "HIGH",
"vulnIntegrityImpact": "HIGH",
"vulnerabilityResponseEffort": "NOT_DEFINED"
},
"format": "CVSS",
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-379",
"description": "CWE-379 Creation of Temporary File in Directory with Insecure Permissions",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-11-19T08:00:16.608Z",
"orgId": "6b3ad84c-e1a6-4bf7-a703-f496b71e49db",
"shortName": "EEF"
},
"references": [
{
"name": "Insecure temporary file in mix deps.partition lets a local user execute code in another user\u0027s dependency build",
"tags": [
"vendor-advisory",
"related"
],
"url": "https://github.com/elixir-lang/elixir/security/advisories/GHSA-96q6-xhwp-fc8q"
},
{
"name": "EEF CNA record for CVE-2026-97209",
"tags": [
"related"
],
"url": "https://cna.erlef.org/cves/CVE-2026-97209.html"
},
{
"name": "OSV record EEF-CVE-2026-97209",
"tags": [
"related"
],
"url": "https://osv.dev/vulnerability/EEF-CVE-2026-97209"
},
{
"name": "Introducing commit 7f3d95b in elixir-lang/elixir",
"tags": [
"related"
],
"url": "https://github.com/elixir-lang/elixir/commit/7f3d95b60c28ae3026a5c1bf943166391245bfd1"
},
{
"name": "Fix commit 55eb912 in elixir-lang/elixir",
"tags": [
"patch"
],
"url": "https://github.com/elixir-lang/elixir/commit/55eb91220a1de14dc5aa27029d1f45b0f5832b2d"
},
{
"name": "Fix commit 9adbe95 in elixir-lang/elixir",
"tags": [
"patch"
],
"url": "https://github.com/elixir-lang/elixir/commit/9adbe955c8664f4be77d879dd38c003dd39fa777"
}
],
"source": {
"discovery": "EXTERNAL"
},
"title": "Insecure temporary file in mix deps.partition lets a local user execute code in another user\u0027s dependency build",
"workarounds": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eOn a multi-user host, set \u003ccode\u003eTMPDIR\u003c/code\u003e to a private per-user directory with mode \u003ccode\u003e0700\u003c/code\u003e before running Mix, so that \u003ccode\u003eSystem.tmp_dir/0\u003c/code\u003e resolves to a location other users cannot pre-create or read. Alternatively, keep partitioned compilation disabled by leaving \u003ccode\u003eMIX_OS_DEPS_COMPILE_PARTITION_COUNT\u003c/code\u003e unset or at \u003ccode\u003e1\u003c/code\u003e, which keeps the configuration inside the parent process.\u003c/p\u003e"
},
{
"base64": false,
"type": "text/markdown",
"value": "On a multi-user host, set `TMPDIR` to a private per-user directory with mode `0700` before running Mix, so that `System.tmp_dir/0` resolves to a location other users cannot pre-create or read. Alternatively, keep partitioned compilation disabled by leaving `MIX_OS_DEPS_COMPILE_PARTITION_COUNT` unset or at `1`, which keeps the configuration inside the parent process."
}
],
"value": "On a multi-user host, set TMPDIR to a private per-user directory with mode 0700 before running Mix, so that System.tmp_dir/0 resolves to a location other users cannot pre-create or read. Alternatively, keep partitioned compilation disabled by leaving MIX_OS_DEPS_COMPILE_PARTITION_COUNT unset or at 1, which keeps the configuration inside the parent process."
}
],
"x_proofOfConcept": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003col\u003e\n\u003cli\u003eOn a multi-user Linux host where \u003ccode\u003eSystem.tmp_dir()\u003c/code\u003e resolves to \u003ccode\u003e/tmp\u003c/code\u003e, the attacker creates \u003ccode\u003e/tmp/mix_deps_partition\u003c/code\u003e as their own directory and watches it for new files.\u003c/li\u003e\n\u003cli\u003eThe victim runs \u003ccode\u003emix deps.compile\u003c/code\u003e (directly, or through \u003ccode\u003emix compile\u003c/code\u003e or \u003ccode\u003emix test\u003c/code\u003e) with \u003ccode\u003eMIX_OS_DEPS_COMPILE_PARTITION_COUNT=2\u003c/code\u003e on a project with at least two non-local dependencies. \u003ccode\u003eFile.mkdir_p/1\u003c/code\u003e succeeds on the existing directory and the config file is written into it.\u003c/li\u003e\n\u003cli\u003eBefore the partition VMs boot and read the file, the attacker decodes it, adds a \u003ccode\u003ecompile:\u003c/code\u003e shell command to every dependency in \u003ccode\u003econfig[:deps]\u003c/code\u003e, re-encodes it and writes it back.\u003c/li\u003e\n\u003cli\u003eEach partition decodes the attacker\u0027s term and \u003ccode\u003edeps.compile\u003c/code\u003e runs the injected command as the victim user.\u003c/li\u003e\n\u003c/ol\u003e"
},
{
"base64": false,
"type": "text/markdown",
"value": "1. On a multi-user Linux host where `System.tmp_dir()` resolves to `/tmp`, the attacker creates `/tmp/mix_deps_partition` as their own directory and watches it for new files.\n2. The victim runs `mix deps.compile` (directly, or through `mix compile` or `mix test`) with `MIX_OS_DEPS_COMPILE_PARTITION_COUNT=2` on a project with at least two non-local dependencies. `File.mkdir_p/1` succeeds on the existing directory and the config file is written into it.\n3. Before the partition VMs boot and read the file, the attacker decodes it, adds a `compile:` shell command to every dependency in `config[:deps]`, re-encodes it and writes it back.\n4. Each partition decodes the attacker\u0027s term and `deps.compile` runs the injected command as the victim user."
}
],
"value": "* On a multi-user Linux host where System.tmp_dir() resolves to /tmp, the attacker creates /tmp/mix_deps_partition as their own directory and watches it for new files.\n* The victim runs mix deps.compile (directly, or through mix compile or mix test) with MIX_OS_DEPS_COMPILE_PARTITION_COUNT=2 on a project with at least two non-local dependencies. File.mkdir_p/1 succeeds on the existing directory and the config file is written into it.\n* Before the partition VMs boot and read the file, the attacker decodes it, adds a compile: shell command to every dependency in config[:deps], re-encodes it and writes it back.\n* Each partition decodes the attacker\u0027s term and deps.compile runs the injected command as the victim user."
}
],
"x_technicalAnalysis": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003e\u003cstrong\u003e1. Payload written to a shared location\u003c/strong\u003e\u003c/p\u003e\n\u003cp\u003e\u003ccode\u003eMix.Tasks.Deps.Partition.server/4\u003c/code\u003e in \u003ccode\u003elib/mix/lib/mix/tasks/deps.partition.ex\u003c/code\u003e encodes \u003ccode\u003eMix.ProjectStack.peek()\u003c/code\u003e with \u003ccode\u003e:erlang.term_to_binary/1\u003c/code\u003e and Base64, calls \u003ccode\u003eFile.mkdir_p/1\u003c/code\u003e on \u003ccode\u003ePath.join(System.tmp_dir(), \"mix_deps_partition\")\u003c/code\u003e, and writes the payload to a file with a random name inside it. The directory name is fixed, carries no user id, and \u003ccode\u003eFile.mkdir_p/1\u003c/code\u003e succeeds on a directory that already exists, whoever owns it. The file is created with the default mode, so it is readable by other users in a shared temporary directory.\u003c/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. Partition VMs trust the file\u003c/strong\u003e\u003c/p\u003e\n\u003cp\u003eEach partition is a fresh \u003ccode\u003eelixir\u003c/code\u003e VM started with \u003ccode\u003e--config-file \u0026lt;path\u0026gt;\u003c/code\u003e. \u003ccode\u003eMix.Tasks.Deps.Partition.client/0\u003c/code\u003e reads the file with \u003ccode\u003eFile.read!/1\u003c/code\u003e, decodes it with \u003ccode\u003e:erlang.binary_to_term/1\u003c/code\u003e, and pushes the decoded entry (project name, config and \u003ccode\u003emix.exs\u003c/code\u003e path) with \u003ccode\u003eMix.ProjectStack.push/3\u003c/code\u003e. Nothing verifies that the file still holds what the parent wrote.\u003c/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. Attacker control\u003c/strong\u003e\u003c/p\u003e\n\u003cp\u003eA local user who created \u003ccode\u003emix_deps_partition\u003c/code\u003e before the victim\u0027s build owns it and may replace or rewrite any file inside, so they swap the payload between the parent\u0027s write and the client\u0027s read. The client then compiles the attacker\u0027s \u003ccode\u003edeps\u003c/code\u003e list, and a dependency\u0027s \u003ccode\u003ecompile:\u003c/code\u003e option is a shell command Mix executes in the victim\u0027s build. On the development branch the payload also carries \u003ccode\u003ecode_path\u003c/code\u003e and \u003ccode\u003ecompiler_options\u003c/code\u003e, which the client applies with \u003ccode\u003e:code.set_path/1\u003c/code\u003e and \u003ccode\u003eCode.compiler_options/1\u003c/code\u003e, so there the attacker also controls the client VM\u0027s code path.\u003c/p\u003e"
},
{
"base64": false,
"type": "text/markdown",
"value": "**1. Payload written to a shared location**\n\n`Mix.Tasks.Deps.Partition.server/4` in `lib/mix/lib/mix/tasks/deps.partition.ex` encodes `Mix.ProjectStack.peek()` with `:erlang.term_to_binary/1` and Base64, calls `File.mkdir_p/1` on `Path.join(System.tmp_dir(), \"mix_deps_partition\")`, and writes the payload to a file with a random name inside it. The directory name is fixed, carries no user id, and `File.mkdir_p/1` succeeds on a directory that already exists, whoever owns it. The file is created with the default mode, so it is readable by other users in a shared temporary directory.\n\n**2. Partition VMs trust the file**\n\nEach partition is a fresh `elixir` VM started with `--config-file \u003cpath\u003e`. `Mix.Tasks.Deps.Partition.client/0` reads the file with `File.read!/1`, decodes it with `:erlang.binary_to_term/1`, and pushes the decoded entry (project name, config and `mix.exs` path) with `Mix.ProjectStack.push/3`. Nothing verifies that the file still holds what the parent wrote.\n\n**3. Attacker control**\n\nA local user who created `mix_deps_partition` before the victim\u0027s build owns it and may replace or rewrite any file inside, so they swap the payload between the parent\u0027s write and the client\u0027s read. The client then compiles the attacker\u0027s `deps` list, and a dependency\u0027s `compile:` option is a shell command Mix executes in the victim\u0027s build. On the development branch the payload also carries `code_path` and `compiler_options`, which the client applies with `:code.set_path/1` and `Code.compiler_options/1`, so there the attacker also controls the client VM\u0027s code path."
}
],
"value": "1. Payload written to a shared location\n\nMix.Tasks.Deps.Partition.server/4 in lib/mix/lib/mix/tasks/deps.partition.ex encodes Mix.ProjectStack.peek() with :erlang.term_to_binary/1 and Base64, calls File.mkdir_p/1 on Path.join(System.tmp_dir(), \"mix_deps_partition\"), and writes the payload to a file with a random name inside it. The directory name is fixed, carries no user id, and File.mkdir_p/1 succeeds on a directory that already exists, whoever owns it. The file is created with the default mode, so it is readable by other users in a shared temporary directory.\n\n2. Partition VMs trust the file\n\nEach partition is a fresh elixir VM started with --config-file \u003cpath\u003e. Mix.Tasks.Deps.Partition.client/0 reads the file with File.read!/1, decodes it with :erlang.binary_to_term/1, and pushes the decoded entry (project name, config and mix.exs path) with Mix.ProjectStack.push/3. Nothing verifies that the file still holds what the parent wrote.\n\n3. Attacker control\n\nA local user who created mix_deps_partition before the victim\u0027s build owns it and may replace or rewrite any file inside, so they swap the payload between the parent\u0027s write and the client\u0027s read. The client then compiles the attacker\u0027s deps list, and a dependency\u0027s compile: option is a shell command Mix executes in the victim\u0027s build. On the development branch the payload also carries code_path and compiler_options, which the client applies with :code.set_path/1 and Code.compiler_options/1, so there the attacker also controls the client VM\u0027s code path."
}
]
}
},
"cveMetadata": {
"assignerOrgId": "6b3ad84c-e1a6-4bf7-a703-f496b71e49db",
"assignerShortName": "EEF",
"cveId": "CVE-2026-97209",
"datePublished": "2026-10-30T08:59:17.615Z",
"dateReserved": "2026-10-14T21:45:01.541Z",
"dateUpdated": "2026-11-19T08:00:16.608Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-86836 (GCVE-0-2026-86836)
Vulnerability from cvelistv5 – Published: 2026-09-14 17:44 – Updated: 2026-09-15 08:18| Vendor | Product | Version | |
|---|---|---|---|
| Eclipse Foundation | Eclipse Ankaios |
Affected:
0.1.0 , ≤ 1.0.2
(semver)
|
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-86836",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-09-14T18:00:13.648615Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-09-14T18:00:25.088Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "Eclipse Ankaios",
"vendor": "Eclipse Foundation",
"versions": [
{
"lessThanOrEqual": "1.0.2",
"status": "affected",
"version": "0.1.0",
"versionType": "semver"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "https://gitlab.eclipse.org/krusev"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eIn Eclipse Ankaios versions 0.1.0 through 1.0.2, the agent creates workload files and Control Interface named pipes (FIFOs) under a predictable path derived from the agent name and a hash of the workload\u0027s runtime configuration. If a directory or FIFO already exists at that path when the agent (re)starts, the agent reuses it based only on an existence and/or file-type check, without validating its owner or permissions. A local, unprivileged user with write access to the same base directory (by default under `$TMPDIR/ankaios`, e.g. shared `/tmp`) can pre-create this path hierarchy, including the two Control Interface FIFOs, before the agent starts. The agent then treats the attacker-owned FIFOs as the legitimate Control Interface for the targeted workload. The attacker can complete the Control Interface handshake and issue requests using that workload\u0027s configured `controlInterfaceAccess` permissions, allowing impersonation of the workload and, depending on its configured permissions, unauthorized reading and/or modification of the cluster\u0027s desired state.\u003c/p\u003e"
}
],
"value": "In Eclipse Ankaios versions 0.1.0 through 1.0.2, the agent creates workload files and Control Interface named pipes (FIFOs) under a predictable path derived from the agent name and a hash of the workload\u0027s runtime configuration. If a directory or FIFO already exists at that path when the agent (re)starts, the agent reuses it based only on an existence and/or file-type check, without validating its owner or permissions. A local, unprivileged user with write access to the same base directory (by default under `$TMPDIR/ankaios`, e.g. shared `/tmp`) can pre-create this path hierarchy, including the two Control Interface FIFOs, before the agent starts. The agent then treats the attacker-owned FIFOs as the legitimate Control Interface for the targeted workload. The attacker can complete the Control Interface handshake and issue requests using that workload\u0027s configured `controlInterfaceAccess` permissions, allowing impersonation of the workload and, depending on its configured permissions, unauthorized reading and/or modification of the cluster\u0027s desired state."
}
],
"impacts": [
{
"capecId": "CAPEC-149",
"descriptions": [
{
"lang": "en",
"value": "CAPEC-149"
}
]
}
],
"metrics": [
{
"cvssV4_0": {
"Automatable": "NOT_DEFINED",
"Recovery": "NOT_DEFINED",
"Safety": "NOT_DEFINED",
"attackComplexity": "LOW",
"attackRequirements": "PRESENT",
"attackVector": "LOCAL",
"baseScore": 8.4,
"baseSeverity": "HIGH",
"exploitMaturity": "NOT_DEFINED",
"privilegesRequired": "LOW",
"providerUrgency": "NOT_DEFINED",
"subAvailabilityImpact": "HIGH",
"subConfidentialityImpact": "NONE",
"subIntegrityImpact": "NONE",
"userInteraction": "NONE",
"valueDensity": "NOT_DEFINED",
"vectorString": "CVSS:4.0/AV:L/AC:L/AT:P/PR:L/UI:N/VC:H/VI:H/VA:N/SC:N/SI:N/SA:H",
"version": "4.0",
"vulnAvailabilityImpact": "NONE",
"vulnConfidentialityImpact": "HIGH",
"vulnIntegrityImpact": "HIGH",
"vulnerabilityResponseEffort": "NOT_DEFINED"
},
"format": "CVSS",
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-379",
"description": "CWE-379",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"cweId": "CWE-276",
"description": "CWE-276",
"lang": "en",
"type": "CWE"
}
]
},
{
"descriptions": [
{
"cweId": "CWE-367",
"description": "CWE-367",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-09-15T08:18:26.215Z",
"orgId": "e51fbebd-6053-4e49-959f-1b94eeb69a2c",
"shortName": "eclipse"
},
"references": [
{
"url": "https://gitlab.eclipse.org/security/cve-assignment/-/work_items/280"
},
{
"url": "https://github.com/eclipse-ankaios/ankaios/pull/799"
},
{
"url": "https://github.com/eclipse-ankaios/ankaios/releases/tag/v1.0.3"
}
],
"source": {
"discovery": "UNKNOWN"
},
"x_generator": {
"engine": "Vulnogram 1.0.5"
}
}
},
"cveMetadata": {
"assignerOrgId": "e51fbebd-6053-4e49-959f-1b94eeb69a2c",
"assignerShortName": "eclipse",
"cveId": "CVE-2026-86836",
"datePublished": "2026-09-14T17:44:56.384Z",
"dateReserved": "2026-09-08T14:40:05.969Z",
"dateUpdated": "2026-09-15T08:18:26.215Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-85028 (GCVE-0-2026-85028)
Vulnerability from cvelistv5 – Published: 2026-09-03 18:07 – Updated: 2026-09-03 18:28- CWE-379 - Creation of temporary file in directory with insecure permissions
| URL | Tags |
|---|---|
| https://github.com/aws/aws-fpga/releases/tag/v2.3.4 | release-notespatch |
| https://aws.amazon.com/security/security-bulletin… | vendor-advisory |
| https://github.com/aws/aws-fpga/security/advisori… | release-notes |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-85028",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-09-03T18:27:53.054437Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-09-03T18:28:05.817Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "aws-fpga",
"vendor": "AWS",
"versions": [
{
"lessThan": "2.3.4",
"status": "affected",
"version": "0",
"versionType": "custom"
}
]
}
],
"cpeApplicability": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:a:aws:aws-fpga:*:*:*:*:*:*:*:*",
"versionEndExcluding": "2.3.4",
"versionStartIncluding": "0",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
],
"operator": "OR"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "\u003cp\u003eCreation of a temporary file in a directory with insecure permissions in the FPGA management tool installation component in AWS FPGA Development Kit (aws-fpga) before 2.3.4 might allow local users to execute arbitrary code with root privileges via crafted shell content placed at a predictable path in a world-writable temporary directory, which the installation step reads after elevating its own privileges.\u003c/p\u003e\u003cp\u003eTo remediate this issue, users should upgrade to version 2.3.4.\u003c/p\u003e"
}
],
"value": "Creation of a temporary file in a directory with insecure permissions in the FPGA management tool installation component in AWS FPGA Development Kit (aws-fpga) before 2.3.4 might allow local users to execute arbitrary code with root privileges via crafted shell content placed at a predictable path in a world-writable temporary directory, which the installation step reads after elevating its own privileges.\n\n\n\nTo remediate this issue, users should upgrade to version 2.3.4."
}
],
"impacts": [
{
"capecId": "CAPEC-29",
"descriptions": [
{
"lang": "en",
"value": "CAPEC-29 Leveraging Time-of-Check and Time-of-Use (TOCTOU) Race Conditions"
}
]
}
],
"metrics": [
{
"cvssV3_1": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 7.8,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"format": "CVSS",
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
},
{
"cvssV4_0": {
"Automatable": "NOT_DEFINED",
"Recovery": "NOT_DEFINED",
"Safety": "NOT_DEFINED",
"attackComplexity": "LOW",
"attackRequirements": "PRESENT",
"attackVector": "LOCAL",
"baseScore": 7.3,
"baseSeverity": "HIGH",
"exploitMaturity": "NOT_DEFINED",
"privilegesRequired": "LOW",
"providerUrgency": "NOT_DEFINED",
"subAvailabilityImpact": "NONE",
"subConfidentialityImpact": "NONE",
"subIntegrityImpact": "NONE",
"userInteraction": "NONE",
"valueDensity": "NOT_DEFINED",
"vectorString": "CVSS:4.0/AV:L/AC:L/AT:P/PR:L/UI:N/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N",
"version": "4.0",
"vulnAvailabilityImpact": "HIGH",
"vulnConfidentialityImpact": "HIGH",
"vulnIntegrityImpact": "HIGH",
"vulnerabilityResponseEffort": "NOT_DEFINED"
},
"format": "CVSS",
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-379",
"description": "CWE-379 Creation of temporary file in directory with insecure permissions",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-09-03T18:18:25.233Z",
"orgId": "ff89ba41-3aa1-4d27-914a-91399e9639e5",
"shortName": "AMZN"
},
"references": [
{
"tags": [
"release-notes",
"patch"
],
"url": "https://github.com/aws/aws-fpga/releases/tag/v2.3.4"
},
{
"tags": [
"vendor-advisory"
],
"url": "https://aws.amazon.com/security/security-bulletins/2026-096-aws/"
},
{
"tags": [
"release-notes"
],
"url": "https://github.com/aws/aws-fpga/security/advisories/GHSA-g4hc-wrmm-2x74"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "Creation of Temporary File in Directory with Insecure Permissions in AWS FPGA Development Kit",
"x_generator": {
"engine": "Vulnogram 1.0.5"
}
}
},
"cveMetadata": {
"assignerOrgId": "ff89ba41-3aa1-4d27-914a-91399e9639e5",
"assignerShortName": "AMZN",
"cveId": "CVE-2026-85028",
"datePublished": "2026-09-03T18:07:19.380Z",
"dateReserved": "2026-09-02T20:02:05.161Z",
"dateUpdated": "2026-09-03T18:28:05.817Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
CVE-2026-82346 (GCVE-0-2026-82346)
Vulnerability from cvelistv5 – Published: 2026-08-31 20:35 – Updated: 2026-08-31 20:53- CWE-379 - Creation of Temporary File in Directory with Insecure Permissions
| Vendor | Product | Version | |
|---|---|---|---|
| HP Inc | HP ImageDiags |
Affected:
5.0.0.0 , < <5.0.0.36
(custom)
|
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-82346",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-08-31T20:53:42.939965Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-08-31T20:53:49.878Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"defaultStatus": "unaffected",
"product": "HP ImageDiags",
"vendor": "HP Inc",
"versions": [
{
"lessThan": "\u003c5.0.0.36",
"status": "affected",
"version": "5.0.0.0",
"versionType": "custom"
}
]
}
],
"credits": [
{
"lang": "en",
"type": "finder",
"value": "benzdeus (Thinnawarth Mathuros)"
}
],
"descriptions": [
{
"lang": "en",
"supportingMedia": [
{
"base64": false,
"type": "text/html",
"value": "A potential security vulnerability has been identified in the HP ImageDiags for versions prior to 5.0.0.36. The vulnerability could potentially allow a local attacker to escalate privileges due to insufficient access controls."
}
],
"value": "A potential security vulnerability has been identified in the HP ImageDiags for versions prior to 5.0.0.36. The vulnerability could potentially allow a local attacker to escalate privileges due to insufficient access controls."
}
],
"metrics": [
{
"cvssV4_0": {
"Automatable": "NOT_DEFINED",
"Recovery": "NOT_DEFINED",
"Safety": "NOT_DEFINED",
"attackComplexity": "LOW",
"attackRequirements": "NONE",
"attackVector": "LOCAL",
"baseScore": 7,
"baseSeverity": "HIGH",
"exploitMaturity": "NOT_DEFINED",
"privilegesRequired": "LOW",
"providerUrgency": "NOT_DEFINED",
"subAvailabilityImpact": "NONE",
"subConfidentialityImpact": "NONE",
"subIntegrityImpact": "NONE",
"userInteraction": "ACTIVE",
"valueDensity": "NOT_DEFINED",
"vectorString": "CVSS:4.0/AV:L/AC:L/AT:N/PR:L/UI:A/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N",
"version": "4.0",
"vulnAvailabilityImpact": "HIGH",
"vulnConfidentialityImpact": "HIGH",
"vulnIntegrityImpact": "HIGH",
"vulnerabilityResponseEffort": "NOT_DEFINED"
},
"format": "CVSS",
"scenarios": [
{
"lang": "en",
"value": "GENERAL"
}
]
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-379",
"description": "CWE-379: Creation of Temporary File in Directory with Insecure Permissions",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-08-31T20:35:39.046Z",
"orgId": "74586083-13ce-40fd-b46a-8e5d23cfbcb2",
"shortName": "hp"
},
"references": [
{
"url": "https://support.hp.com/us-en/document/ish_15572821-15572929-16/hpsbgn04143"
}
],
"source": {
"discovery": "UNKNOWN"
},
"title": "HP ImageDiags - Potential Escalation of Privilege",
"x_generator": {
"engine": "Vulnogram 1.0.5"
}
}
},
"cveMetadata": {
"assignerOrgId": "74586083-13ce-40fd-b46a-8e5d23cfbcb2",
"assignerShortName": "hp",
"cveId": "CVE-2026-82346",
"datePublished": "2026-08-31T20:35:39.046Z",
"dateReserved": "2026-08-28T16:42:02.512Z",
"dateUpdated": "2026-08-31T20:53:49.878Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
Mitigation
Many contemporary languages have functions which properly handle this condition. Older C temp file functions are especially susceptible.
Mitigation
Try to store sensitive tempfiles in a directory which is not world readable -- i.e., per-user directories.
Mitigation
Avoid using vulnerable temp file functions.
No CAPEC attack patterns related to this CWE.